Journal Papers 2025

  1. Lin B.Z.H.; Zhang E.T.; Ng H.; Tan M.Y.L.; Soh Z.H.; Wong Y.M.; Chua C.G.A.; Lew K.S.; Pang E.P.P.; Tan H.Q.; Park S.Y.; Ng B.F.; Koh W.Y.C. Design and additive manufacture of patient-specific head phantom for radiotherapy https://doi.org/10.1016/j.matdes.2025.113719
  2. Lee J.M.; Ma W.C.; Yeong W.Y. Dual-hydrogel thermoresponsive system with bioinspired pore control for drug delivery https://doi.org/10.1016/j.nxmate.2024.100281
  3. Zhai W.; Li G.; Zhou W. Evaluation of Laser Powder Bed Fusion-Fabricated 316L/CuCrZr Bimetal Joint https://doi.org/10.3390/ma18071434
  4. Jeon S.; Park S.J.; Moon S.K.; Yang D. Enhanced mechanical properties and reduced anisotropy of material extrusion-manufactured short carbon fibre-reinforced plastic via cold isostatic pressing https://doi.org/10.1080/17452759.2025.2499934
  5. Liu R.; Zhou Y.; Gao M.; Shi W.; Zhang Y.; Liu X.; Gu Z. 3D Capillary Transistors for Photothermal-Responsive Unidirectional Liquid Transport https://doi.org/10.1002/adfm.202416593
  6. Geng Z.; Wu Z.; Wang X.; Zhang L.; She W.; Tan M.J. A novel 3D printing scheme for lunar construction with extremely low binder utilization https://doi.org/10.1016/j.addma.2025.10465
  7. Fu X.; Wu J.; Zhou Z.; Tan M.J.; Huang Y.; Sun J.; Song W.; Guan P.; Yang Y.; Li Y.; Ritchie R.O. Interfacial strain concentration and relaxation along crystalline-amorphous boundaries of B2-reinforced bulk-metallic-glass-composites during loading https://doi.org/10.1016/j.actamat.2025.120787
  8. Feng Z.; Wang G.; Wang Y.; Dang M.; Fan W.; Tan H.; Hao Z.; Zhang S.; Chen Y.; Peng Y.; Zhang T.; Shi S.; Lu X.; Zhang F.; Lin X.; Huang W. Investigation on the scale-dependent behavior of microstructure characteristics of laser powder bed fused TiB2/AlSi10Mg composite https://doi.org/10.1016/j.jmst.2024.06.004
  9. Park S.J.; Choi J.P.; Lee P.-H.; Moon S.K. Strategic design and simulation of interfaces for enhanced joint performance in metal-polymer hybrid structures https://doi.org/10.1093/jcde/qwaf029
  10. He W.; Ma W.; Ye H.; Wu H.; Tran V.T.; Chen X.; Huang Y.; An J.  Stretchable superhydrophobic laser-induced graphene heaters with high heating rate for robust passive anti-icing and rapid active de-icing https://doi.org/10.1016/j.cej.2025.160424
  11. Zhang J.; Zhai W.; Zhou W.; Long Z.; Yang L.; Li X. Laser powder bed fusion of Ti6Al4V graded scaffold for local stiffness matching https://doi.org/10.1016/j.mtcomm.2025.111787
  12. Lim K.-H.; Bae J.-S.; Chandra S.; Ryou K.; Choi P.-P.; Tan X.; Sim G.-D. Exceptional creep resistance of additively manufactured 316L stainless steel via unprecedented early laves phase formation               https://doi.org/10.1016/j.msea.2025.148006
  13. Alay T.K.; Cagirici M.; Yagmur A.; Gur C.H. Determination of the anisotropy in mechanical properties of laser powder bed fusion Inconel 718 by ultrasonic testing https://doi.org/10.1080/10589759.2024.2316255
  14. Helaehil J.V.; Huang B.; Bartolo P.; Santamaria-JR M.; Caetano G.F.  Bone regeneration: The influence of composite HA/TCP scaffolds and electrical stimulation on TGF/BMP and RANK/RANKL/OPG pathways https://doi.org/10.1016/j.injury.2025.112158
  15. Chen J.; Chen J.; Wang H.; He L.; Huang B.; Dadbakhsh S.; Bartolo P.Fabrication and development of mechanical metamaterials via additive manufacturing for biomedical applications: a review  https://doi.org/10.1088/2631-7990/ad88e3
  16. Kumar S.; Chandra S.; Ramamurty U.; Prasad K.E. Tribological behavior of directed energy-deposited 316L stainless steel and its ceramic reinforced composite under dry sliding conditions  https://doi.org/10.1016/j.wear.2024.205710
  17. Ng W.L.; Tan J.S. Machine Learning in Cultivated Meat: Enhancing Sustainability, Efficiency, Quality, and Scalability Across the Production Pipeline  https://doi.org/10.1007/s11947-025-03853-2
  18. Hou Y.; Zhang H.; Zhou K. Ultraflexible Sensor Development via 4D Printing: Enhanced Sensitivity to Strain, Temperature, and Magnetic Fields  https://doi.org/10.1002/advs.202411584
  19. Ananda M.B.; Marsudi M.A.; Budiarso I.J.; Aimon A.H.; Iskandar F.; Vyas C.; Cooper G.; Bartolo P.J.D.S.; Wibowo A. 3D printed 2D materials for tissue engineering applications  https://doi.org/10.1016/j.chphma.2024.12.004
  20. Liang H.; Zhao H.; Ye H.; Miyamoto H.; Asai Y.; Kumano Y.; Ho J.Y. Additively manufactured hybridized heat sinks co-optimized for simultaneous thermal enhancement and weight reduction https://doi.org/10.1016/j.applthermaleng.2025.126135
  21. Wang Y.; Fan W.; Zhou F.; Prashanth K.G.; Feng Z.; Zhang S.; Tan H.; Lin X. The influence of process parameters on the microstructure and properties of the TiC/Ti-alloy composites fabricated by the directed energy deposition process. https://doi.org/10.1016/j.jmrt.2024.12.043
  22. Chai L.; Li R.; Sun Y.; Zhou K.; Pan J. MOF-derived Carbon-Based Materials for Energy-Related Applications https://doi.org/10.1002/adma.202413658
  23. Xie J.; Feng Y.; Wang X.; Li X.; Yu J.; Gao A.; Jiang J.; Chang Q.; Dai Y.; Liu W.; Guo S. Fully exposed platinum clusters for the efficient reverse water-gas shift reaction at low temperatures https://doi.org/10.1016/j.apcatb.2025.125341
  24. Lee A.W.L.; Seah K.K.W.; Ng B.F.; Zhang E.T.; Lu W.F.; Low J.S.C. Generative ecodesign for mechanical products: A design workflow https://doi.org/10.1016/j.clet.2025.100890
  25. Goh G.D.; Wong K.K.; Jaw W.Q.; Gobi R.; Vellayappan M.V.; Goh Y.J.J.; Goh G.L.; Seet H.L.; Yeong W.Y.; Nai M.L.S.  Exploring PLA/TPU blends in pellet-based printing for multifunctional applications: Blending and interfacial properties https://doi.org/10.1016/j.mser.2025.100981
  26. Park S.J.; Yang J.; Lee J.H.; Hong S.; Moon S.K.; Son Y.; Park S.-H. High-strength of additive-manufactured PEEK and Ti6Al4V structure via warm isostatic pressing: applications in medical implants and injection moulds https://doi.org/10.1080/17452759.2024.2449566
  27. Yue H.; Wang Y.; Fernandes S.; Vyas C.; Bartolo P. Bioprinting of GelMA/PEGDA Hybrid Bioinks for SH-SY5Y Cell Encapsulation: Role of Molecular Weight and Concentration   https://doi.org/10.1002/mabi.202400587
  28. Liu B.; Su Q.; Wang S.; Wang F. Experimental and numerical study of riveted joints in truss bridges reinforced with added steel plates https://doi.org/10.1016/j.tws.2025.113314
  29. Liu Z.; Li M.; Wang X.; Wong T.N.; Tan M.J. Investigate mechanisms of different printing parameters on the mechanical anisotropy of 3D concrete printing elements by using computed tomography scan and computational fluid dynamics methods https://doi.org/10.1016/j.addma.2025.104760
  30. Lum L.Y.X.; Leong K.C.; Ho J.Y. The synergistic effect of micro/nanostructure length scale and fluid thermophysical properties on pool boiling heat transfer https://doi.org/10.1016/j.applthermaleng.2024.124878
  31. Zhao Y.; Wang Z.; Shi L.; Gao S.; Qian D.; Chen K.; Li Y.; Pantleon W. Simultaneous strength optimization and recrystallization prevention in induction-heating-assisted laser additively manufactured Ni-based superalloys https://doi.org/10.1080/21663831.2025.2491566
  32. Chen A.; Su J.; Zhou M.; Cang M.; Li Y.; Shi Y.; Zhang Z.; Zhu Y.; Su B.; Liu Y.; Ye Z.-G.; Shi Y.; Röedel J.; Cui H.; Zhang H.; Zhou K.; Lu J.; Yan C. Biocompatible piezoelectric lattice materials with ultrasound-regulated multimodal responses https://doi.org/10.1016/j.mser.2024.100876
  33. Gao M.; Liu X.; Fan J.; Gao J.; Zhou Y.; Zhou K. Capillarity-Assisted 3D Patterning of Liquid Metal https://doi.org/10.1002/adfm.202415819
  34. Wang Y.; Hou Y.; Vyas C.; Huang B.; Bartolo P. An integrated hybrid 3D bioprinting of heterogeneous and zone-specific construct resembling structural and biofunctional properties of osteochondral tissue https://doi.org/10.1088/2752-5724/adb7f6
  35. Li Z.; Miao X.; Li J.; Lee J.; Li X.; Ahn H.-J.; Wu A.; Zhao W.; Yun J.; Lee S.W. Tear-Based Battery Embedded with Prussian Blue Analogues and Silver Nanoparticles for Smart Contact Lenses https://doi.org/10.1021/acsnano.5c05610
  36. Padhy S.P.; Mishra S.R.; Tan L.P.; Davidson K.P.; Xu X.; Chaudhary V.; Ramanujan R.V. Robustness of machine learning predictions for Fe-Co-Ni alloys prepared by various synthesis methods https://doi.org/10.1016/j.isci.2024.111580
  37. Ng W.L.; Yeow C.H.E.; Huang X.; Lee S.; Yeong W.Y. Physically crosslinked gelatin bio-inks with enhanced printability, degradation and mechanical robustness for multi-modal bioprinting https://doi.org/10.1002/INMD.20250058
  38. Feng Y.; Zhao D.; Cai C.; He K.; Wang H.; Zhou K.; Tang K. Electrosorption-coupled flow-electrode capacitive deionization process for simultaneous fractionation, desalination, and resources removal/recovery from dye/salt mixture https://doi.org/10.1016/j.jwpe.2025.107354Nnnnn
  39. Li H.; Bartolo P.J.D.S.; Zhou K. Direct 4D printing of hydrogels driven by structural topology https://doi.org/10.1080/17452759.2025.2462962
  40. Wang T.; Li N.; Yu N.; Mutilba U.; Flores J.; Wang Y.; Bartolo P.; Ong S.K. Robot-assisted additive manufacturing for aerospace applications: recent trends and its future possibilities https://doi.org/10.1080/0951192X.2025.2478007
  41. Li Y.; Wang B.; Wang Y.; Wang Q.; Zhou X.; Zhang M.; Wu T. Beneficial effect of heat input to improve microbial corrosion resistance of welded joint in X80 steel pipeline https://doi.org/10.1016/j.jmst.2024.10.034
  42. Gao J.; Zhu C.; Gao S.; Ji W.; Xue M.; Zhou K. Generative adversarial network–enabled microstructural mapping from surface profiles for laser powder bed fusion   https://doi.org/10.1080/17452759.2025.2499925
  43. Luo R.; Wu H.; Liu Y.; Yan C.; Zhou K.; Shi Y. Additively manufactured liquid metal–based piezoresistive device with dual functions of force sensing and mechanical energy absorption https://doi.org/10.1016/j.mattod.2025.01.018
  44. Li L.; Wang S.; Chen T.; Chatzi E.; Heydarinouri H.; Ghafoori E. Arresting fatigue cracks in steel plates using prestressed bonded Fe-SMA strips: Analytical prediction and experimental validation https://doi.org/10.1016/j.tws.2025.112971
  45. Chandra S.; Cagirici M.; Ramamurty U. Process parameter optimisation for precision manufacturing of H13 tool steel via laser-based directed energy deposition https://doi.org/10.1016/j.jmapro.2025.05.043
  46. Fan X.; Zhang M.; Hu L.; Dong L.; Yu Q.; Zhang B.; Zhou K.; Wang D. Modeling and spatio-temporal optimization of grayscale digital light processing 3D-printed structures with photobleaching resins https://doi.org/10.1016/j.addma.2025.104659
  47. Wang Y.; Yue H.; Liu A.; Cui Y.; Hou Y.; Ni X.; Pereira R.F.; Huang B.; Vyas C.; Bartolo P. Dual crosslinkable bioink for direct and embedded 3D bioprinting at physiological temperature https://doi.org/10.1016/j.mattod.2025.02.005
  48. Zhou M.; Tian Y.; Nai M.L.S.; Qi H.J.; Zhou K. 4D printing of multiscale filler–reinforced thermoplastic polyurethane nanocomposites with electro-activated shape memory properties https://doi.org/10.1080/17452759.2025.2474537
  49. Teo B.H.W.; Tran V.T.; Tang C.; Chen K.; Zeng J.; Du H.   Effects of additives and pre-heating temperature on interlayer shrinkage of polyamide-12 parts in Additive Manufacturing               https://doi.org/10.1016/j.polymer.2025.128409
  50. Loh Z.W.; Zaid M.H.M.; Matori K.A.; Kechik M.M.A.; Sa’at N.K.; Kamal I.; Shah A.Z.; Hisam R.; Cheong W.M. Exploring the radiation attenuation potential on waste eggshell-derived SiO2–CaO–B2O3–Na2O–P2O5–CaF2 bioactive glass for dental applications https://doi.org/10.1007/s00339-025-08643-3
  51. Zhao H.; Ye H.; Liang H.; Liu P.; Asai Y.; Miyamoto H.; Kajitani R.; Sakata T.; Ho J.Y. Development of conduction optimized heat sinks with enhanced fluid flow path for passive cooling applications https://doi.org/10.1016/j.ijheatmasstransfer.2025.126963
  52. Lum L.Y.X.; Liu P.; Ye H.; Ho J.Y. Revealing Microstructured Surface Critical Heat Flux Degradation Mechanisms and Synergistic Pool Boiling Enhancement in Fluorinated Fluids https://doi.org/10.1021/acsami.4c22543
  53. Mishbak H.; Hassan M.H.; Daskalakis E.; Omar A.M.; Freitas D.M.; Mirihanage W.; Mativenga P., (2); Potluri P.; Bartolo P., (1) Accelerated degradation of 3D-printed PETG bone–tissue scaffolds via geometrical control https://doi.org/10.1016/j.cirp.2025.04.022
  54. Lee J.; Lee H.; Tan W.S.; Chuah C.Y.; Tan M.J.; Bae T.-H.; Song J. Enhancing CO2 capture efficiency using optimized 3D-Printed structured adsorbents https://doi.org/10.1016/j.seppur.2025.131495
  55. Lee T.; Ng C.S.; Su P.-C. Warpage correction for vat photopolymerization 3D printing https://doi.org/10.1016/j.addma.2025.104740
  56. Xu L.; Chai Z.; Peng B.; Zhou W.; Chen X. Improving High-Temperature Mechanical Properties of Additively Manufactured Inconel 718 Through Heat Treatment https://doi.org/10.1007/s11665-024-09495-3
  57. Ye H.; Zhao H.; Lum L.Y.X.; Ho J.Y.  Unveiling flow boiling hysteresis mechanisms and characteristics of R134a within minichannels https://doi.org/10.1016/j.ijheatmasstransfer.2025.127244
  58. Chua C.K.; An J.; Fan S.; Zhang X.; Ouyang L.; Liu H.; Zhang L.; Ren Y.; Gou M.; Ng W.L.; Yeong W.Y.; Zhu H.; Meng Z.; He J.  A perspective on transformative bioprinting https://doi.org/10.36922/ijb.3525
  59. Zhai W.; Zhou W.; Yu Y.; Nai S.M.L.  Additive manufacturing of TiB2 particles enabled high-performance 316L with a unique core-shell melt pool structure https://doi.org/10.1016/j.jmapro.2025.02.036
  60. Chandra S.; Radhakrishnan J.; Huang S.; Wei S.; Ramamurty U.  Solidification in metal additive manufacturing: challenges, solutions, and opportunities  https://doi.org/10.1016/j.pmatsci.2024.101361
  61. Tan L.P.; Davidson K.P.; Cagirici M.; Xu X.; Padhy S.P.; Chaudhary V.; Ramanujan R.V. Multi-property evaluation of low Cu content Fe-Cu magnetic alloys https://doi.org/10.1016/j.materresbull.2025.113374
  62. Peng Y.; Fan W.; Hao D.; Feng Z.; Dang M.; Hao Z.; Tan H.; Zhang F.; Lin X. Formation mechanism of defects in Invar 36/MnCu functionally graded material fabricated by directed energy deposition https://doi.org/10.1016/j.jmst.2024.08.006