Journal Papers 2024

 

  1. Chia J.X.; Li K.H.H. 3D-printed x-band 1-port TM01 circular waveguide to 4-port TE10 rectangular waveguide mode converter & power splitter https://doi.org/10.1080/02726343.2024.2378785
  2. Guo Y.; Zhang Y.; Pan Z.; Zhou W. Recent progress of sensing and machine learning technologies for process monitoring and defects detection in wire arc additive manufacturing               https://doi.org/10.1016/j.jmapro.2024.07.060
  3. Li S.; Wu J.; Chen X.; Zhu M.; Chen J.; Xue P.; Huang Y.; Tan M.J.; Yang Y.; Fu X.Two-stage work-hardening of a transformable B2-enhanced metallic glass composite by molecular dynamics simulation https://doi.org/10.1016/j.coco.2024.102045
  4. Zhang S.; Sun C.; Fan W.; Zhang Q.; Feng Z.; Hao Z.; Tan H.; Zhang F.; Lin X. Microstructure and mechanical properties of Sc/Zr modified 1460 Al–Li alloy fabricated by laser powder bed fusion https://doi.org/10.1016/j.msea.2024.146673
  5. Tay Y.W.D.; Lim S.G.; Fadhel B.A.; Amr I.T.; Bamagain R.A.; Al-Hunaidy A.S.; Paul S.C.; Tan M.J. Potential of carbon dioxide spraying on the properties of 3D concrete printed structures https://doi.org/10.1016/j.ccst.2024.100256
  6. Alhijaily A.; Kilic Z.M.; Bartolo P. Development of a novel gantry system for cooperative printing of plastic materials https://doi.org/10.1080/17452759.2024.2305208
  7. Lum L.Y.X.; Liu P.; Ho J.Y. Micro/nanostructuring of metal additively manufactured aluminum alloy for enhanced pool boiling of dielectric fluids https://doi.org/10.1016/j.ijheatmasstransfer.2023.125090
  8. Lim S.X.; Teo A.G.H.; Ong K.-S.; Chong K.S.L.; Duan F. Wetting geometry and deposition patterns manipulation with bi-dispersed particle-laden droplets https://doi.org/10.1016/j.colsurfa.2024.133884
  9. Nahr F.; Li B.; Bartels D.; Zhou K.; Bartolo P.J.D.S., (1); Schmidt M., (1) Effect of NiO nanoparticles on duplex stainless steel processed via DED-LB and PBF-LB https://doi.org/10.1016/j.cirp.2024.04.020
  10. Li H.; Chng C.B.; Zheng H.; Wu M.S.; Bartolo P.J.D.S.; Qi H.J.; Tan Y.J.; Zhou K. Self-Healable and 4D Printable Hydrogel for Stretchable Electronics https://doi.org/10.1002/advs.202305702
  11. Tian Y.; Zhang X.; Hou B.; Jarlöv A.; Du C.; Zhou K. Programmable heterogeneous lamellar lattice architecture for dual mechanical protection https://doi.org/10.1073/pnas.2407362121
  12. Go A.; Jeon E.S.; Moon S.K.; Park S.J. Fabrication of 17-4PH stainless steel by metal material extrusion: Effects of process parameters and heat treatment on physical properties               https://doi.org/10.1016/j.matdes.2024.113471
  13. Shen S.; Kanbur B.B.; Wu C.; Duan F. Three-Dimensional Printing Conformal Cooling with Structural Lattices for Plastic Injection Molding https://doi.org/10.32604/fhmt.2024.048984
  14. Lum L.Y.X.; Leong K.C.; Ho J.Y. Optimizing additively manufactured macro-fin structure designs for enhanced pool boiling of dielectric fluids https://doi.org/10.1016/j.ijheatmasstransfer.2023.124883
  15. Li H.-Y.; Ng C.S.; Su P.-C.Fabrication of dense YSZ ceramic via vat photopolymerization with low ceramic particles loading https://doi.org/10.1016/j.ceramint.2023.10.327
  16. Tsirogiannis E.C.; Daskalakis E.; Vogiatzis C.; Psarommatis F.; Bartolo P. Advanced composite armor protection systems for military vehicles: Design methodology, ballistic testing, and comparison https://doi.org/10.1016/j.compscitech.2024.110486
  17. Hou Y.; Wang W.; Bartolo P. The effect of graphene and graphene oxide induced reactive oxygen species on polycaprolactone scaffolds for bone cancer applications https://doi.org/10.1016/j.mtbio.2023.100886
  18. Geng L.; Wu F.; Dang M.; Feng Z.; Peng Y.; Kang C.; Fan W.; Wang Y.; Tan H.; Zhang F.; Lin X. Laser powder bed fusion of SiC particle-reinforced pre-alloyed TiB2/AlSi10Mg composite with high-strength and high-stiffness https://doi.org/10.1016/j.jmatprotec.2024.118635
  19. Zeng Z.; Gao S.; Pokkalla D.K.; Zhang S.; Han C.; Liu F.; Xiao Z.; Kandukuri S.Y.; Liu Y.; Zhou K. Additive manufacturing of metallic metamaterials with enhanced mechanical properties enabled by microstructural and structural design https://doi.org/10.1016/j.ijmachtools.2024.104172
  20. Ting G.H.A.; Tay Y.W.D.; Quah T.K.N.; Tan M.J.; Wong T.N. Sustainable Support Material for Overhang Printing in 3D Concrete Printing Technology https://doi.org/10.3390/app14177800
  21. Chou G.R.; Huang S.; Sing S.L. The effect of thermal rest time during in situ alloying of Ti41Nb through laser powder bed fusion https://doi.org/10.36922/msam.3506
  22. Chen C.; Wong S.J.L.; Tan E.Z.; Li H. Contrastive learning based on hierarchical graph of microstructures through directed energy deposition process to establish process-structure–property relationship via autoencoder https://doi.org/10.1016/j.matdes.2024.113115
  23. Hu Z.; Gao S.; Mikula J.; Shen X.; Seet H.L.; Quek S.S.; Zhou K.; Nai S.M.L. Enhanced Plastic Stability: Achieving High Performance in a Al6xxx Alloy Fabricated by Additive Manufacturing https://doi.org/10.1002/adma.202307825
  24. Zhai W.; Guo Y.; Aishwarya; Canturri C.; Shandro R.; Zhou W. Wire arc additive manufacturing of ER70S-6/S355 bimetal component https://doi.org/10.1016/j.msea.2024.146498
  25. Yupanqui Mieles J.; Vyas C.; Daskalakis E.; Hassan M.; Birkett J.; Omar A.M.; Humphreys G.; Diver C.; Bartolo P.     Electrospun polyvinyl alcohol fibres incorporating an antimicrobial gel for enzymatically controlled reactive oxygen species release https://doi.org/10.1007/s42242-024-00312-3
  26. Zou X.; Chen K.; Zhou W.; Chen C.; Cheng Z.; Xie F.; Pei Y.; Kong L.; Wang M. Role of metal surface amorphization on enhancing interfacial bonding in TC4-UHMWPE hybrid structure https://doi.org/10.1016/j.jmapro.2024.11.010
  27. Lee T.; Kim J.-H.; Ng C.S.; Andreu A.; Kim I.; Lee W.; Kim H.; Su P.-C.; Yoon Y.-J. Prediction of curing depth dependence on CNT nanofiller dispersion for vat photopolymerization 3D printing https://doi.org/10.1016/j.cej.2024.149110
  28. Hou Y.; Gao M.; Bai X.; Zhao L.; Du H.; Zhou K. 3D printing of bio-inspired porous polymeric solar steam generators for efficient and sustainable desalination https://doi.org/10.1063/5.0200505
  29. Hou Y.; Wang W.; Bartolo P.  In vitro investigations on the effects of graphene and graphene oxide on polycaprolactone bone tissue engineering scaffoldshttps://doi.org/10.1007/s42242-024-00280-8
  30. Zhai W.; Liu F.; Wang Q.; Nai S.M.L.; Zhou W. Cryogenic and high temperature tensile properties of 316L steel additively manufactured by laser powder bed fusion https://doi.org/10.1016/j.msea.2024.146461
  31. Li X.; Wu W.; Ho J.Y.; Zhang Y.; Guo C.; Feng T. Experimental study of equivalent expansion inside two-phase expanders https://doi.org/10.1016/j.applthermaleng.2024.124351
  32. Zhu H.; Ye X.; Tian Y.; Ge Y.; Huang H.; Lim Z.H.; Gao M.; Liu B.; Zhao Y.; Zhou K.; Jiang C. Bioinspired porous magnetoresponsive soft actuators with programmable 3D curved shapes https://doi.org/10.1063/5.0231351
  33. Zhou X.-B.; Wang Z.-H.; Ou-Yang Z.-L.; Su H.; Wang Y.; Li Z.; Wu T.-Q. Effect of cathode protection on Desulfovibrio desulfuricans corrosion of X80 steel in a marine tidal environment; (阴极保护对海洋潮汐环境中X80 钢Desulfovibrio desulfuricans腐蚀的影响) https://doi.org/10.1007/s11771-024-5806-1
  34. Mieles J.Y.; Vyas C.; Humphreys G.; Diver C.; Bartolo P. ROS-releasing PVA sub-micron antimicrobial dressing with enhanced aqueous stability and mechanical properties https://doi.org/10.1039/d4ma00395k
  35. Gao S.; Ji W.; Zhu Q.; Jarlöv A.; Shen X.; Bai X.; Zhu C.; Lek Y.Z.; Xiao Z.; Zhou K. Pulsed-wave laser additive manufacturing of CrCoNi medium-entropy alloys with high strength and ductility https://doi.org/10.1016/j.mattod.2024.10.004
  36. Suntornnond R.; Ng W.L.; Shkolnikov V.; Yeong W.Y. A facile method to fabricate cell-laden hydrogel microparticles of tunable sizes using thermal inkjet bioprinting https://doi.org/10.1002/dro2.144
  37. Daskalakis E.; Huang B.; Hassan M.H.; Omar A.M.; Vyas C.; Acar A.A.; Fallah A.; Cooper G.; Weightman A.; Blunn G.; Koç B.; Bartolo P. In Vitro Evaluation of Pore Size Graded Bone Scaffolds with Different Material Composition https://doi.org/10.1089/3dp.2022.0138
  38. Lim S.X.; Duan F. Effect of Mixed Surfactant on Evaporation Driven Salt Crystallization Morphology in Sessile Droplets https://doi.org/10.1021/acs.langmuir.4c04089
  39. Davidson K.P.; Liu R.; Zhu C.; Cagiciri M.; Tan L.P.; Alagesan A.; Singamneni S. Effect of build orientation and heat treatment on the microstructure, mechanical and corrosion performance of super duplex stainless steels fabricated via laser powder bed fusion https://doi.org/10.1039/d4ma00448e
  40. Chen M.; Hou Y.; An R.; Qi H.J.; Zhou K. 4D Printing of Reprogrammable Liquid Crystal Elastomers with Synergistic Photochromism and Photoactuation https://doi.org/10.1002/adma.202303969
  41. Zhang M.; Fan X.; Dong L.; Jiang C.; Weeger O.; Zhou K.; Wang D. Voxel Design of Grayscale DLP 3D-Printed Soft Robots https://doi.org/10.1002/advs.202309932
  42. Geng Z.; Zhang L.; Wu Z.; Huang J.; Wang X.; Tan M.J.; She W.; Zhou H.; Geng G. Silicate-lunar regolith composite: A vacuum self-hardened and comprehensively durable extraterrestrial construction material https://doi.org/10.1016/j.conbuildmat.2024.138517
  43. Bin Samad M.N.; Xiang Lum L.Y.; Ho J.Y.; Wong T.N.; Leong K.C. Metal additively manufactured air-cooled condenser for enhanced thermohydraulic performance https://doi.org/10.1504/IJHM.2024.140566
  44. Zhang L.; Zhai W.; Zhao K.; Bi G.; Chen X.; Zhou W. Oxidation behavior and resultant deposition efficiency and material properties of laser aided additively manufactured stainless steel 316 L https://doi.org/10.1016/j.jmapro.2024.02.032
  45. Dong L.; Zhou K.; Wang D. Programmable nonreciprocal Poynting effect enabled by lattice metamaterials https://doi.org/10.1126/sciadv.adl5774
  46. Sun X.; Yue L.; Yu L.; Forte C.T.; Armstrong C.D.; Zhou K.; Demoly F.; Zhao R.R.; Qi H.J. Machine learning-enabled forward prediction and inverse design of 4D-printed active plates   https://doi.org/10.1038/s41467-024-49775-z
  47. Lee J.H.; Park S.J.; Yang J.; Moon S.K.; Park J. Crack Control in Additive Manufacturing by Leveraging Process Parameters and Lattice Design https://doi.org/10.3390/mi15111361
  48. Lim S.G.; Tan M.J. A rheological model for concrete additive manufacturing https://doi.org/10.1016/j.conbuildmat.2024.138771
  49. Liu Z.; Li M.; Wong T.N.; Tan M.J. Determine the effects of pore properties on the mechanical performances of 3D concrete printing units with experimental and numerical methods https://doi.org/10.1016/j.jobe.2024.109730
  50. Lek Y.Z.; Gao S.; Shen X.; Jarlöv A.; Cailloux T.; Zeng Z.; Nai S.M.L.; Zhou K. In-situ alloying of maraging steel with enhanced mechanical properties and corrosion resistance by laser directed energy deposition https://doi.org/10.1016/j.msea.2024.146898
  51. Wang X.; Du L.; Liu Z.; Li M.; Weng Y.; Liu Z.; Tay Y.W.D.; Fan Z.; Wong T.N.; Tan M.J. 3D Cementitious composites printing with pretreated recycled crumb rubber: mechanical and acoustic insulation properties https://doi.org10.1080/17452759.2024.2399787
  52. Ye H.; Lum L.Y.X.; Kandasamy R.; Zhao H.; Ho J.Y.  Flow boiling heat transfer enhancement of R134a in additively manufactured minichannels with microengineered surfaces https://doi.org/10.1016/j.applthermaleng.2024.124150
  53. Wang L.; Lu B.; Wang X.; Tan M.J.; Li K.H.H.; Wong T.N. Evaluation of 3D robotic spray parameters on the performance of the developed sensing functional cementitious coating https://doi.org/10.1080/17452759.2024.2383969
  54. Han C.-J.; Zou Y.-J.; Hu G.-L.; Dong Z.; Li K.; Huang J.-M.; Li B.-Y.; Zhou K.; Yang Y.-Q.; Wang D. Effect of process parameters on microstructure and mechanical properties of a nickel-aluminum-bronze alloy fabricated by laser powder bed fusion; [工艺参数对激光粉末床熔融镍铝青铜合金微观结构和力学性能的影响] https://doi.org/10.1007/s11771-024-5660-1
  55. Li L.; Wang S.; Chatzi E.; Motavalli M.; Ghafoori E. Analysis and design recommendations for structures strengthened by prestressed bonded Fe-SMA https://doi.org/10.1016/j.engstruct.2024.117513
  56. Park S.J.; Lee J.S.; Lee J.E.; Moon S.K.; Son Y.; Park S.-H.  Influence of Nozzle Temperature on Gas Emissions and Mechanical Properties in Material Extrusion-based Additive Manufacturing of Super Engineering Plastics https://doi.org/10.1007/s40684-024-00614-y
  57. Goh G.L.; Lee S.; Cheng S.H.; Goh D.J.S.; Laya P.; Nguyen V.P.; Han B.S.; Yeong W.Y. Enhancing interlaminar adhesion in multi-material 3D printing: A study of conductive PLA and TPU interfaces through fused filament fabrication https://doi.org/10.36922/msam.2672
  58. Tsirogiannis E.C.; Daskalakis E.; Hassan M.H.; Omar A.M.; Bartolo P. Ballistic design and testing of a composite armour reinforced by CNTs suitable for armoured vehicles https://doi.org/10.1016/j.dt.2023.04.013
  59. Lim S.G.; Tay Y.W.D.; Paul S.C.; Lee J.; Amr I.T.; Fadhel B.A.; Jamal A.; Al-Khowaiter A.O.; Tan M.J. Carbon capture and sequestration with in-situ CO2 and steam integrated 3D concrete printing https://doi.org/10.1016/j.ccst.2024.100306
  60. Sun X.; Yu L.; Yue L.; Zhou K.; Demoly F.; Zhao R.R.; Qi H.J. Machine learning and sequential subdomain optimization for ultrafast inverse design of 4D-printed active composite structures https://doi.org/10.1016/j.jmps.2024.105561
  61. Huang X.; Ng W.L.; Yeong W.Y. Predicting the number of printed cells during inkjet-based bioprinting process based on droplet velocity profile using machine learning approaches https://doi.org/10.1007/s10845-023-02167-4
  62. Armstrong C.D.; Montgomery S.M.; Yue L.; Demoly F.; Zhou K.; Qi H.J. Robotic Conformal Material Extrusion 3D Printing for Appending Structures on Unstructured Surfaces https://doi.org/10.1002/aisy.202300516
  63. Guan L.; Fan J.; Ng Z.K.; Teo E.H.T.; Le Ferrand H.  Modulation of the electromagnetic shielding effectiveness through micro/macrostructure design for electronic packaging https://doi.org/10.1038/s41427-024-00554-8
  64. Yang X.; Li B.; Li Y.; Yang B.; Zhou K. A finite volume–based thermo-fluid-mechanical model of the LPBF process https://doi.org/10.1016/j.ijmecsci.2024.109759
  65. Chandra S.; Wang C.; Tor S.B.; Ramamurty U.; Tan X. Powder-size driven facile microstructure control in powder-fusion metal additive manufacturing processes https://doi.org/10.1038/s41467-024-47257-w
  66. Kang C.; Xiong X.; Wang X.; Feng Z.; Fan W.; Wang Y.; Dang M.; Tan H.; Zhang F.; Lin X. Influence of SiC particles on the microstructure and mechanical behaviors of AlMgScZr alloy processed by laser powder bed fusion https://doi.org/10.1016/j.msea.2024.146911
  67. Lum L.Y.X.; Wong T.N.; Ho J.Y.; Leong K.C. Three-dimensional topology-optimized structures for enhanced low-temperature thermal energy storage https://doi.org/10.1016/j.apenergy.2024.123001
  68. Zhang L.; Zhai W.; Zhao K.; Bi G.; Zhou W.; Lu G.; Xu S. Enhanced quasi-static and dynamic tensile properties of stainless steel 316L produced by laser aided additive manufacturing in controlled argon environmenthttps://doi.org/10.1016/j.msea.2024.146255
  69. Zhai W.; Aishwarya; Shandro R.; Zhou W. Microstructure and mechanical properties of the wire arc additively manufactured 316L/ER70S-6 bimetal structure https://doi.org/10.1080/17452759.2024.2375105
  70. Teoh J.H.; Soh E.; Le Ferrand H. Manipulating fungal growth in engineered living materials through precise deposition of nutrients https://doi.org/10.36922/ijb.3939
  71. Liu Z.; Li M.; Wang X.; Wang S.; Wang L.; Wong T.N.; Tan M.J. Axial performances of the steel rebar reinforced column confined by the steel cable reinforced 3D concrete printing permanent formwork https://doi.org/10.1080/17452759.2024.2382163
  72. Zhai W.; Zhou W.; Yu Y.; Nai S.M.L. https://doi.org/Direct evidence of melting and decomposition of TiC particles in laser powder bed fusion processed 316L-TiC composite https://doi.org/10.1016/j.jmst.2024.02.035
  73. Shan S.; Pham Q.-C. Fast Payload Calibration for Sensorless Contact Estimation Using Model Pre-Training https://doi.org/10.1109/LRA.2024.3455800
  74. Tan P.; Zhou M.; Tang C.; Zhou K. A powder-scale multiphysics framework for powder bed fusion of fiber-reinforced polymer composites https://doi.org/10.1016/j.apmate.2024.100190
  75. Wu J.; Zhu M.; Li S.; Zhong H.; Li P.; Song K.; Song W.; Tan M.J.; Yang Y.; Fu X. Different phase transformation behaviors of B2-CuZr crystalline phase and their associated mechanical properties by molecular dynamics using different potentialshttps://doi.org/10.1016/j.mtcomm.2024.109474
  76. Teng S.P.P.; Tee C.H.; Tan H.B.; Leong K.F. Material extrusion-based printing optimization of recycled HDPE filaments made from used milk jugs https://doi.org/10.36922/msam.4084
  77. Wang S.; Su Q.; Jiang X.; Michels J.; Ghafoori E. Fully bonded iron-based shape memory alloy for retrofitting large-scale bridge girders: Thermal and mechanical behavior https://doi.org/10.1016/j.istruc.2024.106710
  78. Ye W.; Zhou Y.; Liu W.; Hou Y.; Chu F.; Hu Y.; Song L.; Hu W. Fabricating advanced MXene-based hybrid materials to elevate fire safety and mechanical strength in carbon fiber-reinforced bismaleimide resins https://doi.org/10.1016/j.cej.2024.150456
  79. Wang W.; Hou Y.; Yang J.; Yan Z.; Liu F.; Vyas C.; Mirihanage W.; Bartolo P. In situ X-ray diffraction and thermal simulation of material extrusion additive manufacturing of polymer https://doi.org/10.1016/j.matdes.2024.113255
  80. Xiong X.-X.; Liang Z.-X.; Wang P.; Qi Y.; Chen Z.-W.; Liu Z.-Y.; Wang X.-L.; Shen Q.-L.; Kang N.; Zhang L.-C. Mechanical and thermal properties of in situ AlN/Al-12Si composite fabricated by laser powder bed fusion  https://doi.org/10.1016/j.matchar.2024.113825
  81. Sun X.; Zhou K.; Demoly F.; Zhao R.R.; Qi H.J. Perspective: Machine Learning in Design for 3D/4D Printing https://doi.org/10.1115/1.4063684
  82. Zhang Z.; Yu Z.; Yang Q.; Wang Y.; Yao L.; Zhang T.; Liu H.; Fan W. Synergistic effect of NiCr-Cr3C2 + Y2O3 to enhanced performance of Ti-based composite fabricated by laser cladding https://doi.org/10.1016/j.matchar.2024.114138
  83. Yu H.; Liang W.; Miao Q.; Yin M.; Wang Y.; Liu H.; Jin H.; Wei F.; Gong N. High temperature oxidation resistance and thermodynamic properties of (TaNbZr)N and (TaNbZr)C quaternary ceramic coating https://doi.org/10.1016/j.corsci.2024.112315
  84. Zhao H.; Ye H.; Fazle Rabbi K.; Wang X.; Miljkovic N.; Ho J.Y. Micro- and Nanoengineered Metal Additively Manufactured Surfaces for Enhanced Anti-Frosting Applications https://doi.org/10.1021/acsami.4c02765
  85. Liu R.; Wu J.; Hai R.; Zhong H.; Li P.; Xue P.; Tan M.J.; Yang Y.; Fu X. Different impact of recovery annealing and thermal pressure treatments on the microstructure and mechanical properties of rejuvenated Cu64Zr36 metallic glasses: A molecular dynamics study https://doi.org/10.1016/j.jmrt.2024.07.178
  86. Lu B.; Wang L.; Wang X.; Tan M.J.; Li K.H.H.; Wong T.N. Development of robotic sprayable self-sensing cementitious material for smart structural health monitoring https://doi.org/10.1016/j.addma.2024.104161
  87. Liu X.; Gao M.; Li B.; Liu R.; Chong Z.; Gu Z.; Zhou K. Bioinspired Capillary Transistors https://doi.org/10.1002/adma.202310797
  88. Zhai W.; Zhou W.; Nai S.M.L. Effect of Interface Wettability on Additively Manufactured Metal Matrix Composites: A Case Study of 316L-Y2O3 Oxide Dispersion-Strengthened Steel https://doi.org/10.3390/met14020170
  89. Hu S.-N.; Xu W.-C.; Tian N.; Chen S.-M.; Li M.-Y.; Shen J.-F.; Lin J.-X.; Guo S.-L.; Huang X.-Y.; Zhou Z.-Y.; Sun S.-G. A P-O functional group anchoring Pt-Co electrocatalyst for high-durability PEMFCs https://doi.org/10.1039/d3ee04503j
  90. Wang S.; Su Q.; Jiang X.; Li L.; Motavalli M.; Ghafoori E. Self-prestressing bonded patches using Fe-SMA and CFRP for lifetime extension of fatigue-cracked steel details https://doi.org/10.1016/j.conbuildmat.2024.137690
  91. Seetoh I.P.; Ramesh A.K.; Tan W.X.; Lai C.Q. Enhanced photoelectrochemical water splitting using carbon cloth functionalized with ZnO nanostructures via polydopamine assisted electroless deposition https://doi.org/10.1039/d4nr00761a
  92. Benyahia K.; Seriket H.; Blanquer S.; Gomes S.; Bodaghi M.; André J.-C.; Zhou K.; Qi H.J.; Demoly F. Advancing 4D printing through designing interlocking blocks: enhancing deformation uniformity in active composite structures https://doi.org/10.1088/1361-665X/ad3c85
  93. An J.; Tran V.T.; Xu H.; Ma W.; Chen X.; Le T.-S.D.; Du H.; Sun G.; Kim Y.-J. High-Throughput Manufacturing of Multimodal Epidermal Mechanosensors with Superior Detectability Enabled by a Continuous Microcracking strategy https://doi.org/10.1002/advs.202305777
  94. Zhang Y.; Moon S.K. Uncertainty Quantification of Process-Property-Structure Linkage for Fused Filament Fabrication Parts https://doi.org/10.1115/1.4065443
  95. Xu L.; Zhou W.; Zhai W.; Luu D.N.; Nai S.M.L.; Chen X. Cracking mitigation of additively manufactured Inconel 738LC through addition of micro-TiC particles https://doi.org/10.1016/j.jmapro.2024.09.052
  96. Du S.; Teng F.; Zhuang Z.; Zhang D.; Li M.; Li H.; Weng Y. A BIM-enabled robot control system for automated integration between rebar reinforcement and 3D concrete printing https://doi.org/10.1080/17452759.2024.2332423
  97. Li Y.; Lin X.; Hu Y.; Fan W.; Gao X.; Yu J.; Dong H.; Huang W. Microstructure and fracture toughness of a Nb–Ti–Si-based in-situ composite fabricated by laser-based directed energy deposition https://doi.org/10.1016/j.compositesb.2024.111427
  98. Shan S.; Pham Q.-C. Fine Robotic Manipulation Without Force/Torque Sensor https://doi.org/10.1109/LRA.2023.3341770
  99. Lee J.M.; Tan M.J.; Ma W.C.; Yeong W.Y. Decision matrix for integrating 3D printing technologies for biomanufacturing of alternative testing model https://doi.org/10.1007/s00170-024-12966-5
  100. Shah A.Z.; Zaid M.H.M.; Matori K.A.; Loh Z.W.; Hisam R.; Cheong W.M.; Wahab S.A.A. Synthesis of novel Sm3+ doped Li2O-Bi2O3-Al2O3-TeO2 glass system: Optical properties, Judd-Ofelt analysis, and photoluminescence mechanism https://doi.org/10.1016/j.jnoncrysol.2024.123226
  101. Acar A.A.; Daskalakis E.; Bartolo P.; Weightman A.; Cooper G.; Blunn G.; Koc B. Customized scaffolds for large bone defects using 3D-printed modular blocks from 2D-medical images https://doi.org/10.1007/s42242-023-00259-x
  102. Müller J.M.; Kazantsev N.; Allmendinger R.; Salehi-Amiri A.; Reis J.Z.; Jaradat S.; Bartolo H.; Da Silva Bartolo P.J. How to engineer sustainability: from resource-wise manufacturing towards ecosystem-wide impacts https://doi.org/10.1108/SAMPJ-03-2024-0305
  103. Lu B.; Li Z.; Li M.; Feng J.; Wong T.N.; Qian S. Substitution of cement by marine clay in spray-based 3D concrete printing https://doi.org/10.1080/21650373.2023.2278754
  104. 04.Chen Z.; Sun Z.; Qi Y.; Fan W.; Liang V.S.Q.; Kandukuri S.Y.; Bartolo P.J.D.S.; Zhou K. Laser-based directed energy deposition of Monel K-500 and Stellite 6 multi-materials https://doi.org/10.1080/17452759.2024.2399789
  105. Wang Y.; Zhu H.; Xiao M.; Chen C.; Qi Y.; Ke L. Residual deformation analysis of laser powder bed fusion-fabricated lattice structures https://doi.org/10.1080/17452759.2024.2367104
  106. Tian C.; Ouyang D.; Wang P.; Zhang L.; Cai C.; Zhou K.; Shi Y. Strength-ductility synergy of an additively manufactured metastable high-entropy alloy achieved by transformation-induced plasticity strengthening https://doi.org/10.1016/j.ijplas.2023.103823
  107. Yue H.; Liu X.; Hou K.; Vyas C.; Bartolo P. Stereolithography 3D printing of microgroove master moulds for topography-induced nerve guidance conduits https://doi.org/10.36922/ijb.2725
  108. Alhijaily A.; Alqarni A.; Kilic Z.M.; Bartolo P. Development of a mobile 3D printer and comparative evaluation against traditional gantry systems https://doi.org/10.1007/s10845-024-02433-z
  109. Cagirici M.; Xun Y.; Zhang D.; Xu X.; Ding J. Direct ink writing of Ni structures for electrocatalytic water splitting applications https://doi.org/10.1016/j.matchemphys.2023.128574
  110. Zhou Y.; Shen S.; Liu T.; Li P.; Duan F. Effective heat conduction evaluation of lattice structures from selective laser melting printing https://doi.org/10.1016/j.ijheatmasstransfer.2023.124790
  111. Omar A.M.; Hassan M.H.; Daskalakis E.; Smith A.; Dooghue J.; Mirihanage W.; Bartolo P.J.D.S. Biomimetic dual sensing polymer nanocomposite for biomedical applications https://doi.org/10.3389/fbioe.2024.1322753
  112. Feng Z.; Wang G.; Hao Z.; Wang Y.; Tan H.; Fan W.; Dang M.; Zhang S.; Chen Y.; Peng Y.; Zhang T.; Shi S.; Wei L.; Zhang F.; Lin X.; Huang W. Influence of scale effect on surface morphology in laser powder bed fusion technology https://doi.org/10.1080/17452759.2024.2336157
  113. Lu B.; Zhao H.; Li M.; Wong T.N.; Qian S. MgO/fluid catalytic cracking (FCC) ash blends for 3D printing on vertical surfaces https://doi.org/10.1080/21650373.2023.2270571
  114. Ng W.L.; Shkolnikov V. Optimizing cell deposition for inkjet-based bioprinting https://doi.org/10.36922/ijb.2135