/enri-thumbnails/careeropportunities1f0caf1c-a12d-479c-be7c-3c04e085c617.tmb-mega-menu.jpg?Culture=en&sfvrsn=d7261e3b_1)
/cradle-thumbnails/research-capabilities1516d0ba63aa44f0b4ee77a8c05263b2.tmb-mega-menu.jpg?Culture=en&sfvrsn=1bc94f8_1)
7e6fdc03-9018-4d08-9a98-8a21acbc37ba.tmb-mega-menu.jpg?Culture=en&sfvrsn=7deaf618_1)
Introduction
The course is designed to teach students with ABB basic operation knowledge to program ABB Robot with ABB Rapid Programming Language.
Course Availability
-
Date(s): 24 to 26 Jun 2024
Time: 9:00AM to 5:00PM
Venue: ABB Robotic Lab
Registration Closing Date: 03 Jun 2024
After successfully completing the course, the participant should be able to:
- Practice all areas of safety as they pertain to the robot
- Properly start up, operate, and shut down the robot
- Properly identify and recover from robot errors
- Perform program storage and retrieval
- Manual and program control of inputs and outputs
- Create Tool Center Point data
- Edit programmed positions
- Basic simulation using ABB Robotstudio
- Create a program with subroutine structure
- Perform editing techniques
- Program instructions, such as, output control, decision making, operator dialog.
- Name I/O and data with proper names
- Identify system parameters
- Define Work Objects
- System Description
- Event messages
- Positioning the robot by use of joystick control
- Simulation using ABB Robotstudio
- Program creation procedures
- Program modification techniques
- Backup and Restore
- Tool Center Points
- Work Objects
- Program Flow
- Working with numbers
- Operator Communications
- Circles and Offsets
- Hot Editing
This course is intended for personnel responsible for operating the robot, creating programs and editing programs.
Such as:
- Technicians
- Engineers
- Service Personnel
- Supervisory Personnel
- System Integrators
Standard Course Fee: S$3,924.00
|
SSG Funding Support |
Course fee |
Course fee payable after SSG funding, if eligible under various schemes |
|
|
|
BEFORE funding & GST |
AFTER funding & 8% GST |
AFTER funding & 9% GST |
|
Singapore Citizens (SCs) and Permanent Residents (PRs) (Up to 70% funding) |
S$3,600.00 |
S$1,166.40 |
S$1,177.20 |
|
Enhanced Training Support for SMEs (ETSS) |
S$446.40 |
S$457.20 |
|
|
SCs aged ≥ 40 years old |
|||
• NTU/NIE alumni may utilise their $1,600 Alumni Course Credits. Click here for more information.
Note: Course fee payment made before 1 Jan 2024 will be subject to GST at 8%, and payment made on or after 1 Jan 2024 will be subject to GST at 9%.
ABB Robotics Trainer
Furthermore, trainer are also specially individuals with project and application knowledge so that information delivered to the trainee will be relevant to the needs of the industries.
