/enri-thumbnails/careeropportunities1f0caf1c-a12d-479c-be7c-3c04e085c617.tmb-mega-menu.jpg?Culture=en&sfvrsn=d7261e3b_1)
/cradle-thumbnails/research-capabilities1516d0ba63aa44f0b4ee77a8c05263b2.tmb-mega-menu.jpg?Culture=en&sfvrsn=1bc94f8_1)
7e6fdc03-9018-4d08-9a98-8a21acbc37ba.tmb-mega-menu.jpg?Culture=en&sfvrsn=7deaf618_1)
Introduction
The aim of the course is to introduce the fundamental concepts of power system stability and methods of analysis along with control techniques for stability enhancement. Knowledge on advanced methods based on FACTS will also be discussed. It also aims to equip the learners with an in-depth understanding of the practical issues related to the control of power systems and create an awareness of the advanced modeling, analysis and control techniques applicable to power systems.
- Graduate Certificate in Power Engineering
- FlexiMasters in Power Engineering
Download Learning Pathway e-Guide
At the end of the course, learners are able to:
1. apply the modelling process in the design of controllers and development of techniques for assessment and improvement of system performance under steady state, dynamic and transient conditions.
2. understand the concepts of operation, modeling and control of power electronics-based FACTS devices. This will also provide an understanding of how FACTS devices enhance power network performance.
3. equip students with an insight into the actual application of modeling and control techniques in solving practical issues in power systems.
Power System Control
- Methods of improving stability
- Conventional control techniques
- Compensation devices
- Advanced methods based on FACTS
- Case studies
For engineers who wish to upgrade their technical knowledge and skills in the area of power and energy engineering, which can be applied in the power supply industry.
Standard Course Fee: S$1,635
SSG Funding Support | Course fee | Course fee payable after SSG funding, if eligible under various schemes | |
BEFORE funding & GST | AFTER funding & 9% GST | ||
Singapore Citizens (SCs) and Permanent Residents (PRs) (Up to 70% funding) | S$1,500 | S$490.50 | |
Enhanced Training Support for SMEs (ETSS) | S$190.50 | ||
SCs aged ≥ 40 years old | |||
- Standard course fee is inclusive of GST.
- NTU/NIE alumni may utilise their $1,600 Alumni Course Credits. Click here for more information.
| COURSE TITLE | ACADEMIC UNIT |
| CET742 Power Electronic Converters I | 1 |
| CET743 Power Electronic Converters II | 1 |
| CET744 Power Electronic Converters II | 1 |
| CET745 Power Quality I | 1 |
| CET746 Power Quality II | 1 |
| CET747 Power Quality III | 1 |
| CET748 Renewable Energy Systems in Smart Grids I | 1 |
| CET749 Renewable Energy Systems in Smart Grids II | 1 |
| CET750 Renewable Energy Systems in Smart Grids III | 1 |
| CET751 Power System Operation and Planning I | 1 |
| CET752 Power System Operation and Planning II | 1 |
| CET753 Power System Operation and Planning III | 1 |
| CET754 Power System Modelling and Control I | 1 |
| CET755 Power System Modelling and Control II | 1 |
Listed courses are:
- Credit-bearing and stackable to Graduate Certificate in Power Engineering (total 9AUs) and FlexiMasters in Power Engineering (total 15AUs).
- SSG funded and SkillsFuture Credit approved.
