ManTech Publications

• Ranjit Kumar Barai, Tegoeh Tjahjowidodo, and Bobby K Pappachan (2015). Fuzzy Inference System Based Intelligent Sensor Fusion for Estimation of Surface Roughness in Machining Process. 9th International Conference on Sensing Technology (ICST 2015), December 8-10, Auckland, New Zealand
• Han Bo, Muhammad Azhar, Dhanya Menoth Mohan, Domenico Campolo. (2015). Review of robotic control strategies for industrial finishing operations. IEEE ISMA’15
• Balasubramanian Nagarajan, Sylvie Castagne,Swaminathan Annamalai, David Fan Zheng, Chow Cher Wong, "Influence of heat treatment on the conductivity of nickel-based superalloys", International Conference on Mechatronics, Automation and Manufacturing – 2015, Singapore
• V Vijayaraghavan and S Castagne, "Computational Model for Predicting the Effect of Process Parameters on Surface Characteristics of Mass Finished Components", Engineering Computations
• Kai Liang Tan and Swee Hock Yeo. Cavitation Erosion Study in Deionized Water Containing Abrasive Particles. 26th DAAAM International Symposium, Oct 21-24, Zadar, Croatia
• Guru, Prasad AS., Murukeshan V. Matham, and Kelvin HK Chan. "A flexible image fiber probe based speckle imaging for extraction of surface features with possible application in intra-cavity inspection." International Conference on Optical and Photonic Engineering (icOPEN2015). International Society for Optics and Photonics, 2015. DOI:10.1117/12.2190498
• Song, C., M.V. Matham, and K.H.K. Chan. Speckle referencing: digital speckle pattern interferometry (SR- DSPI) for imaging of non-diffusive surfaces. Proc. SPIE 9524, 95242P, 2015. DOI:10.1117/12.2190504

• A.P. Nagalingam, S.H. Yeo, Abhay Gopinath, “A novel hydrodynamic cavitation abrasive technique for internal surface finishing”, Journal of Manufacturing Processes, Year 2019

• A.P. Nagalingam, S.H. Yeo, Abhay Gopinath, “Synergistic Effects in Hydrodynamic Cavitation Abrasive Finishing for Internal Surface-Finish Enhancement of Additive-Manufactured Components”, Additive Manufacturing, Year 2019

• A.P. Nagalingam, S.H. Yeo, Abhay Gopinath, “Investigations into Surface texture improvements using the Hydrodynamic Cavitation Abrasive Finishing Process”, Conference Name: The 8th International Conference of Asian society for precision engineering and nanotechnology, Japan, 25 Nov 2019

• A.P. Nagalingam, S.H. Yeo, Abhay Gopinath, “Effects of Combined Wear Mechanisms in Internal Surface Finishing Using Controlled Hydrodynamic Cavitation Abrasive Finishing Process”, Conference Name: 1st International conference on advanced surface enhancement, Singapore, 12 Sept 2019

• A.P. Nagalingam, S.H. Yeo, Abhay Gopinath, “Effect of internal surface finishing using hydrodynamic cavitation abrasive finishing (HCAF) process on the mechanical properties of additive manufactured components”, Conference Name: 13th Lamdamap international conference and exhibition, Advanced manufacturing research center (AMRC), Sheffield, United Kingdom, 14 March 2019

• A. P. Nagalingam, J.-Y. Lee, S.H. Yeo, “Multi-jet hydrodynamic surface finishing and X-ray computed tomography (X-CT) inspection of laser powder bed fused Inconel 625 fuel injection/spray nozzles”, Journal of materials processing technology, 2021/291, 117018 

• J.-Y. Lee*, A. P. Nagalingam*, S.H. Yeo, “A review on the state-of-the-art of surface finishing processes and related ISO/ASTM standards for metal additive manufactured components”, Virtual and Physical Prototyping, 2020/ 1-29

 • A. P. Nagalingam, S.H. Yeo, “Surface finishing of additively manufactured IN625 complex internal channels: A case study using a multi-jet hydrodynamic approach”, Additive Manufacturing, 36 (2020) 101428 

 • A. P. Nagalingam, H.K. Yuvaraj, V. Santhanam, S.H. Yeo, “Hydrodynamic multiphase flow finishing for surface integrity enhancement of additive manufactured internal channels”, Journal of materials processing technology, 283 (2020) 116692

 • A. P. Nagalingam, S.H. Yeo, “Controlled hydrodynamic cavitation erosion with abrasive particles for internal surface modification of additive manufactured components”, Wear, 414-415 (2018) 89-100

 • A. P. Nagalingam, S.H. Yeo, “Effects of ambient pressure and fluid temperature in ultrasonic cavitation machining”, The International Journal of Advanced Manufacturing Technology, 98(9) (2018) 2883-2894

 • A.P.Nagalingam, V. Santhanam, N.K.G. Dachepally, S.H. Yeo, “Multiphase hydrodynamic flow characterization for surface finishing the laser powder bed fused AlSi10Mg conformal cooling channels”, Journal of Manufacturing Processes, 2021

 • A. P. Nagalingam, M. Vohra, P. Kapur, S.H. Yeo, “Effect of cut-off, evaluation length, and measurement area in profile and areal surface texture characterization of as-built metal additive manufactured components”, Journal of Applied Sciences, 2021

 • A. P. Nagalingam, Vohra M, Abas NFB, S.H. Yeo, “Experimental and Theoretical Investigation of Relationship between Hydrodynamic Cavitation Number (σ) and Constriction Ratio (β) Using Various Orifice Designs”, Annual Conference on Engineering and Applied Science, Osaka, Japan, November 2018

 • A. P. Nagalingam, S.H. Yeo, “Internal Surface Modification of Additively Manufactured Components Using Hydrodynamic Cavitation and Abrasive Particles”, Proceedings of 132nd ISERD International Conference, Berlin, Germany, September 2018

 • A. P. Nagalingam, Ahmed SA, S.H. Yeo, “An Investigation of Surface Texturing by Ultrasonic Impingement of Micro-Particles”, World Academy of Science, Engineering and Technology, International Science Index 127, International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 11(7), 1378 - 1384

 • A. P. Nagalingam, S.H. Yeo, Tan KL, “Effects of ambient pressure and fluid temperature in ultrasonic cavitation erosion”, Proceedings of the 7th International Conference on Mechanics and Materials in Design. Albufeira/Portugal, June 2017

 • Vohra M, A. P. Nagalingam, Tan WL, S.H. Yeo, “Analysis of Impact Load Induced by Ultrasonic Cavitation Bubble Collapse Using Thin Film Pressure Sensors”, World Academy of Science, Engineering and Technology, International Science Index 131, International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 11(11), 1815 - 1820

 • J.-Y. Lee, A. P. Nagalingam, S.H. Yeo, “Design Consideration for Additively Manufactured Components Through Topology Optimization and Generative Design for Weight Reduction”, International Conference on Advanced Surface Enhancement, 222-225, 2021

 

 • J. Zhang, J.Y. Alcaraz, S.H. Yeo, A. P. Nagalingam, A. Gopinath, “Random impact FEM simulation of irregularly shaped media for parametric study of vibratory surface enhancement”, Journal of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 954405421990128

 • J.Y. Alcaraz, J. Zhang, A. P. Nagalingam, S K. Gopasetty, B.L. Toh, S.H. Yeo, “Numerical modelling of residual stresses during vibratory peening of a 3-stage blisk – a multi-scale discrete element and finite element approach”, Journal of materials processing technology, 2022

 • A. P. Nagalingam, J.Y. Alcaraz, S.K. Gopasetty, B.L. Toh, J. Zhang, S.H. Yeo, “Data-Driven artificial intelligence model for uniform surface polishing of complex geometries in mass vibratory finishing processes”, 2nd International conference on advanced surface enhancement, Singapore, 2021

 • B.L. Toh, S.K. Gopasetty, A. P. Nagalingam, J.Y. Alcaraz, J. Zhang, S.H. Yeo, “Vibratory finishing of laser powder bed fused stainless steel 316 internal cooling channels”, 2nd International conference on advanced surface enhancement, Singapore, 2021

 • Hemanth KY, SK Gopasetty, AP Nagalingam, BL Toh, A Gopinath, “Effect of In-trough and out of trough fixturing in vibro-polishing”, 41st International MATADOR Conference on Advanced Manufacturing, 2021