Publications

Journal paper

 

2008

1.       Leng, J.S., Huang, W.M., Lan, X., Liu, Y.J., Du, S.Y., Significantly reducing electrical resistivity by forming conductive Ni chains in a polyurethane shape-memory polymer/carbon-black composite, Applied Physics Letters, Vol. 92, 2008, 204101 (3 pages)

2.       Leng, J.S., Lan, X., Liu, Y.J., Du, S.Y., Huang, W.M., Liu, N., Phee, S.J. and Yuan, Q., Electrical conductivity of thermo-responsive shape-memory polymer with embedded micron sized Ni powder chains, Applied Physics Letters, Vol. 92, 2008, 014104 (3 pages)

3.       Liu, N., Xie, Q., Huang, W.M., Phee, S.J. and Guo, N.Q., Formation of micro protrusion array atop shape memory polymer, Journal of Micromechanics and Microengineering, Vol. 18, 2008, 027001 (5 pages)

4.       Zhu, J.J., Liang, N.G., Cai, M., Liew, K.M., Huang, W.M., Theory of phase transformation and reorientation in single crystalline shape memory alloys, Smart materials and Structures, Vol. 17, 2008, 015041 (10 pages)

5.       Fu, Y.Q., Sanjabi, S., Barber, Z.H., Huang, W.M., Cai, M.D., Zhang, S., Luo, J.K., Flewitt, A.J. and Milne, W.I., In-situ observation of transition between surface relief and wrinkling in thin film shape memory alloys, Journal of Nanoscience and Nanotechnology, Vol. 8, No. 5, 2008, pp 2588-2596

6.       Ng, S.B., Huang, W.M. and Shu, D.W., Plastic energy and tearing energy of a NiTi shape memory alloy wire, Materials and Design, Vol. 29, 2008, pp1066-1069

7.       An, L., Huang, W.M., Fu, Y.Q. and Guo, N.Q., A note on size effect in actuating NiTi shape memory alloys by electrical current, Materials and Design, Vol. 29, 2008, pp 1432-1437

8.       Huang, W.M., Fan, H., Leng, S.C., Indentation on very smooth silicon wafers, International Journal of Nanomanufacturing, accepted

9.       Nurveren, K., Akdoğan, A. and Huang, W.M., Evolution of transformation characteristics with heating/cooling rate in NiTi shape memory alloys, Journal of Materials Processing Technology, Vol. 196, 2008. pp129-134

10.   Phee, S.J., Low, S.C., Sun, Z.L., Ho, K.Y., Huang, W.M. and Thant, Z.M., Robotic system for no-scar gastrointestinal surgery, The International Journal of Medical Robotics and Computer Assisted Surgery, Vol. 4, No. 1, 2008, pp15-22

11.   Sun, L. and Huang, W.M., Wet to shrink: an approach to realize negative expansion upon wetting, Advanced Composite Materials, accepted

12.   Xu, L.M., Fan, H., Yang, C. and Huang, W.M., Contact line mobility in liquid droplet spreading on rough surface, Journal of Colloid & Interface Science, Vol. 323, 2008, pp126-132

13.   Pan, GH, Huang, WM, Ng, ZC, Liu, N and Phee, SJ, Glass transition temperature of polyurethane shape memory polymer reinforced with treated/non-treated attapulgite (playgorskite) clay in dry and wet conditions, Smart Materials and Structures, Vol. 17, 2008, 045007 (6 pages)

14.   Liu, N., W.M. Huang, Phee, S.J. and Tong, T.H., Formation of micro protrusions atop thermo-responsive shape memory polymer, Smart Materials and Structures, in press

15.   Lan, X., Huang, W.M., Leng, J.S., Liu, N., Phee, S.J. and Yuan, Q., Electrically conductive shape-memory polymer with anisotropic electro-thermo-mechanical properties, GAK Gummi Fasern Kunststoffe (German translation, invited lecture, in press)

 

2007

16.   Cai, M., Langford, S.C., Dickinson, J.T., Wu, M., Huang, W., Xiong, G., Droubay, T.C., Joly, A.G., Beck, K.M. and Hess, W.P., Study of martensitic phase transformation in a NiTiCu thin film shape memory alloy using photoelectron emission microscopy, Advanced Functional Materials, Vol. 17, 2007, pp161-167

17.   Liu, N. Huang, W.M. and Phee, S.J., A secret garden of micro butterflies: phenomenon and mechanism, Surface Review and Letters, Vol. 14, No. 6, 2007, pp1187-1190

18.   Liu, N., Huang, W.M., Phee, S.J., Fan, H. and Chew, K.L., A  generic approach for producing various protrusive shapes on different size scales using shape-memory polymer, Smart Materials and Structures, Vol. 16, 2007, ppN47-N50

19.   Su, J.F., Huang W.M. and Hong, M.H., Indentation and two-way shape-memory in a NiTi polycrystalline shape-memory alloy, Special issue of Smart Materials and Structures on “Recent Advances on Research in Shape Memory Alloys”, Vol. 16, 2007, ppS137-144 (invited contribution)

 

2006

20.   Fu, Y.Q., Sanjabi, S., Barber, Z.H., Clyne, T.W., Huang, W.M., Cai, M.D., Luo, J.K., Flewitt, A.J., Milne, W.I., Evolution of surface morphology in TiNiCu shape memory thin films, Applied Physics Letters, Vol. 89, 2006, pp171922-1-3

21.   Wu, M.J., Huang, W.M. and Chollet, F., In situ characterization of NiTi based shape memory thin films by optical measurement, Smart Materials and Structures, Vol.15, 2006, N29-N35

22.   An, L. and Huang, W.M., Transformation characteristics of shape memory alloys upon thermal cycling, Materials Science and Engineering A, Vol.420, 2006, pp220-227

23.   Pan, G.H. and Huang, W.M., A note on constrained shape memory alloys upon thermal cycling, Journal of Materials Science, Vol. 41, 2006, pp7964-7968

24.   Yang, B. Huang, W.M., Li, C. and Li, L., Effect of moisture on the thermomechanical properties of a polyurethane shape memory polymer, Polymers, Vol. 47, 2006, pp 1348-1356

25.   Fu, Y.Q., Zhang, S., Wu, M.J., Huang, W.M., Du H.J., Luo, J.K., Flewitt, A.J., Milne, W.I., On the lower thickness boundary of sputtered TiNi films for shape memory application, Journal of Thin Solid Films, Vol. 515, 2006, pp80-86

26.   Huang, W.M., Lee, C.W. and Teo, H.P., Thermomechanical behavior of a polyurethane shape memory polymer foam, Journal of Intelligent Material Systems and Structure, Vol. 17, 2006, pp 753-760

27.   Liu, N. and Huang, W.M., Comments on "incomplete transformation induced multiple-step transformation in TiNi shape memory alloys"[Scripta Mater 2005; 53:335], Scripta Materialia, Vol.55, 2006, pp493-495

28.   Liu, N. and Huang, W.M., DSC study on temperature memory effect of NiTi shape memory alloy, Transactions of Nonferrous Metals Society of China, Vol.16, 2006, pps37-s41

29.   Wang, Q., Guo, N., Du, H. and Huang, W., Beam pattern calculation for optimization of broadband array transducers, Journal of Acoustic Society of American, Vol. 120, No. 2, 2006, pp741-749

30.   Yeo. H.C., Guo, N., Du, H., Huang, W.M. and Jian, X.M., Characterisation of IC packaging interfaces and loading effects, Microelectronics Reliability, Vol. 46, 2006, pp1892-1897

 

2005

31.   Huang, W.M., Hu, Y.Y. and An, L., Determination of stress versus strain relationship and other thermomechanical properties of thin films, Applied Physics Letters, Vol. 87, 2005, pp201904-1-3

32.   Huang, W.M., Yang, B., An, L., Li, C. and Chan, Y.S., Water-driven programmable polyurethane shape memory polymer: demonstration and mechanism, Applied Physics Letters, Vol.86, 2005, pp114105-1-3

33.   Huang, W.M., Hu, Y.Y. and An, L., Response to ‘comment on “a simple approach to determine five thermomechanical properties of thin ductile films on an elastic substrate”’[Appl. Phys. Lett. 87, 116102 (2005)], Applied Physics Letters, Vol. 87, 2005, pp116102-1

34.   Huang, W.M., Mechanics of coiled nanotubes in uniaxial tension, Materials Science and Engineering A, Vol. 408, 2005, pp136-140

35.   Huang, W.M., Su, J.F., Hong, M.H. and Yang, B., Pile-up and sink-in in micro-indentation of a NiTi shape-memory alloy, Scripta Materialia, Vol. 53, 2005, pp1055-1057

36.   Fu, Y., Du, H., Zhang, S. and Huang, W., XPS characterization of surface and interfacial structure of sputtered TiNi films on Si substrate, Materials Science and Engineering A, Vol. 403, 2005, pp25-31

37.   Yang, B., Huang, W.M., Li, C., Li, L. and Chor, J.H., Qualitative separation of the effects of carbon nano-powder and moisture on the glass transition temperature of polyurethane shape memory polymer, Scripta Materialia, Vol. 53, 2005, pp105-107

38.   He, Q., Huang, W.M., Gao, X.Y. and Hong, M.H., Numerical investigation of CO2 laser heating for annealing Ni/Ti multilayer thin films, Smart Materials and Structures, Vol. 14, 2005, pp1320-1324

39.   Li, C., Hsieh, J.H. and Huang, W.M., A study on the reactive sputtering process with plasma chemistry, Surface and Coatings Technology, Vol. 198, 2005, pp372-378

40.   Yang, B., Huang, W.M., Li, C. and Chor, J.H., Effects of moisture on the glass transition temperature of polyurethane shape memory polymer filled with nano carbon powder, European Polymer Journal, Vol. 41, No. 5, 2005, pp1123-1128

41.   Huang, W.M. and Xu, W., Hysteresis in shape memory alloys. Is it always a constant? Journal of Materials Science, Vol. 40, 2005, pp 2985 – 2986

42.   Huang, W. M., Wu, J. A., Lim, B. Y. and Vahhi, I. E., V-shape in Young’s modulus vs. strain relationship in shape memory alloys upon mechanical loading, Journal of Alloys and Compounds, Vol. 390, No. 1-2, 2005, pp175-181

43.   Huang, W.M., Transformation front in shape memory alloys, Materials Science and Engineering: A, Vol. 392, No. 1-2, 2005, pp121-129

44.   Huang, W. M., Wu, J. A., Lim, B. Y. and Vahhi, I. E., Behaviour of Young’s Modulus in shape memory alloys upon mechanical loading, Materials Science (Medžiagotyra). Vol. 11, No. 4. 2005, pp 390-393

 

2004

45.   Huang, W.M., Hu, Y.Y. and An, L., A simple approach to determine five thermomechanical properties of thin ductile films on an elastic substrate, Applied Physics Letters, Vol. 85, No. 25, 2004, pp6173-6175

46.   Hu, Y.Y. and Huang, W.M., Elastic and elastic-plastic analysis of multilayer thin films: closed-form solutions, Journal of Applied Physics, Vol. 96, No. 8, 2004, pp4154-4160

47.   Huang, W.M. and Gao, X.Y., Tresca and von Mises yield criteria: a view from strain space, Philosophical Magazine Letters, Vol. 84, No. 10, 2004, pp625-630

48.   He, Q., Huang, W.M., Hong, M.H., Wu, M.J., Fu, Y.Q., Chong, T.C., Chollet, F. and Du, H.J., Characterization of sputtering deposited NiTi shape memory thin films using temperature controllable atomic force microscope, Smart Materials and Structures, Vol. 13, 2004, pp977-982

49.   He, Q., Hong, M.H., Huang, W.M., Chong, T.C., Fu, Y.Q. and Du, H.J., CO2 laser annealing of sputtering deposited NiTi shape memory thin films, Journal of Micromechanics and Microengineering, Vol. 14, 2004, pp950-956

50.   Huang, W.M., Liu, Q.Y., He, L.M. and Yeo, J.H., Micro NiTi-Si cantilever with three stable positions, Sensors and Actuators A, Vol. 114, No. 1, 2004, pp118-122

51.   Fu, Y., Du, H., Huang, W., Zhang, S. and Hu, M., TiNi-based thin films in MEMS applications: a review, Sensors and Actuators A, Vol. 112, No. 2-3, 2004, pp395-408

52.   Yang, B., Huang, W.M., Li, C., Lee, C.M. and Li, L., On the effects of moisture in a polyurethane shape memory polymer, Smart Materials and Structures, Vol. 13, No.1, 2004, pp191-195

53.   Huang, W.M., Transformation progress in shape memory alloys upon loading, Smart Materials and Structures, Vol. 13, 2004, pp443-448

54.   Zhu, J.J., Liu, Q.Y., Huang, W.M. and Liew, K.M., To simulate the behavior of shape memory alloys under thermomechanical cycling, Materials Science and Engineering A, Vol. 365, 2004, pp298-301

55.   Huang, W.M., On the effects of different Young's moduli in phase transformation start stress vs. temperature relationship in shape memory alloys, Scripta Materialia, Vol. 50, No. 3, 2004, pp353-357

 

2003

56.   Huang, W.M., A simple approach to estimate failure surface of polymer and aluminum foams under multiaxial loads, International Journal of Mechanical Sciences, Vol. 45, 2003, pp1531-1540

57.   Fu, Y., Du, H., Huang, W. and Hu, M., TiNi film based shape memory alloy and microactuators, International Journal of Computational Engineering Science, Vol. 4, No. 2, 2003, pp221-225

58.   Huang, W.M. and Lim, H.K., Evolution of energy dissipation and the young's modulus in a martensite NiTi shape memory alloy wire upon cyclic loading, Journal of Materials Science Letters, Vol. 22, 2003, pp1399-1400

59.   Huang, W.M., Tan, J.P., Gao, X.Y. and Yeo, J.H., Design, testing and simulation of NiTi shape memory alloy thin film based micro-grippers, Journal of Microlithography, Microfabrication, and Microsystems, Vol. 2, No. 3, 2003, pp185-190

60.   Zhu, J.J., Huang, W.M. and Liew, K.M., Deformation energy in martensitic transformation, Journal de Physique IV, Vol. 112, 2003, pp179-182

61.   Huang, X., Liu, Y., Ling, S.F., Zhang, H.H. and Huang, W.M., Effect of SiO2 buffer layer on properties of sputter-deposited NiTi shape memory alloy thin films, Surface and Coatings Technology, Vol. 167, No.2-3, 2003, pp148-153

 

2002

62.   Huang, W.M., Tan, J.P., Gao, X.Y. and Yeo, J.H., Micro gripper for medical applications, SGH Proceedings, Vol. 11, No. 3, 2002, pp200-205

63.   Huang, W.M., Goh, H.B. and Li, C., Effects of reheat treatment conditions in training of two-way shape memory, Journal of Materials Science Letters, Vol. 21, No. 13, 2002, pp991-993

64.   Huang, W.M. and Zhu, J.J., To predict the behavior of shape memory alloy under proportional load, Mechanics of Materials, Vol. 34, 2002, pp547-561

65.   Gao, X.Y. and Huang, W.M., Transformation start stress in non-textured shape memory alloys, Smart Materials and Structures, Vol. 11, 2002, pp256-268

66.   Huang, W.M., On the selection of shape memory alloys for actuators, Materials & Design, Vol. 23, 2002, pp11-19

67.   Zhu, J., Liang, N., Huang, W., Liew, K.M. and Liu, Z., A thermodynamic constitutive model for stress induced phase transformation in shape memory alloys, International Journal of Solids and Structures, Vol. 39, No. 3, 2002, pp741-763

 

2001

68.   Huang, W.M., Gao, X.Y., Kung, H.K., Liu, Q.Y., Ng, Q. and Liu, X., Hard disk drive assembly using copper based shape memory alloy, Material Science Forum, Vol. 394-3, 2001, pp95-99

69.   Huang, W.M., Gao, X.Y., Loo, B.K., He, L.M. and Ngoi, B.K. A., Micro gripper using two-way shape memory alloy thin sheet, Material Science Forum, Vol. 394-3, 2001, pp87-90

70.   Huang, W. and Goh, H. B., On the long term stability of two-way shape memory alloy trained by reheat treatment, Journal of Materials Science letters, Vol. 20, 2001, pp1795-1797

71.   Fu, Y.Q., Huang, W.M., Du, H.J., Huang, X., Tan, J.P., Gao, X.Y., Characterization of TiNi shape-memory alloy thin film for MEMS application, Surface and Coatings Technology, Vol. 145, 2001, pp107-112

72.   Tey, S.-J., Huang, W.M. and Sokolwski, W. M., On the effects of long term storage in cold hibernated elastic memory (CHEM) polyurethane foam, Smart Materials and Structures, Vol. 10, No. 2, 2001, pp321-325

73.   Zhu, J.J., Liang, N.G., Liew, K.M. and Huang, W. M., Energy conversion in shape memory alloy heat engine. Part I: theory, Journal of Intelligent Material Systems and Structures, Vol. 12, No. 2, 2001, pp 127-132

74.   Zhu, J.J., Liang, N.G., Huang, W.M. and Liew, K.M., Energy conversion in shape memory alloy heat engine. Part II: simulation, Journal of Intelligent Material Systems and Structures, Vol. 12, No. 2, 2001, pp 133-140

 

2000

75.   Huang, W. and Toh, W., Training two-way shape memory alloy by reheat treatment, Journal of Materials Science Letters (UK), Vol.19, No.17, 2000, pp1549-1550

 

1999

76.   Huang, W., "Yield" surfaces of shape memory alloys and their applications, Acta Materialia, Vol. 47, No. 9, 1999, pp2769-2776

77.   Huang, W. and Wong, Y.L., Effects of pre-strain on transformation temperatures of NiTi shape memory alloy, Journal of Materials Science Letters (UK), Vol. 18, No. 22, 1999, pp1797-1798

78.   Huang, W., Modified shape memory alloy (SMA) model for SMA wire-based actuator design, Journal of Intelligent Material Systems and Structures, Vol. 10, No. 3, 1999, pp221-231

 

1998

79.   Huang, W., Effects of internal stress and martensite variants on phase transformation of NiTi shape memory alloy, Journal of Materials Science Letters (UK), Vol. 17, No. 21, 1998, pp1843-1844

 

Conference paper

 

2008

1.       Motemani, Y., Tan, M.J., White, T., Shearwood, C. and Huang, W., Rapid thermal annealing (RTA) of Ti-rich TiNi thin films, Thinfilms 2008, 13-16 July 2008, Singapore, ID-4354

2.       Huang, W.M., Liu, N., Phee, S.J., Fan, H., Lin, J.Q. and Pan, J.H., Formation of protrusive micro/nano patterns atop shape memory polymers, The 6th International Forum on Advanced Materials Science and Technology (IFAMST 2008), 12-14 June 2008, Hong Kong, China, P-024

3.       Sun, L. and Huang, W.M., Abrupt softening phenomenon in a CuAlNi shape memory single crystal under uniaxial compression, The 6th International Forum on Advanced Materials Science and Technology (IFAMST 2008), 12-14 June 2008, Hong Kong, China, PS-014

4.       Lan, X., Huang, W.M., Liu, N. Phee, S.Y., Leng, JS, Du, S.Y., Improving the electrical conductivity by forming Ni powder chains in a shape-memory polymer filled with carbon black, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 9-13 March 2008, San Diego, California, USA (SPIE Vol.3927)

 

2007

5.       Huang, W.M., Phee, S.J. and Liu, N., Shape memory materials for minimally invasive surgery: new concepts and demonstration, 3rd Asian Conference on Computer Aided Surgery (ACCAS 2007), December 1 & 2, 2007, Singapore

6.       Lan, X., Huang, W.M., Leng, J.S., Liu, N., Phee, SJ and Yuan, Q., Electrically conductive shape-memory polymer with anisotropic electro-thermo-mechanical properties, Polymers in Defence and Aerospace Applications, 18-19 September, Toulouse, France (in Polymers in Defence and Aerospace Applications, Smithers Rapra Technology Ltd, 2007, ISBN 978-1-84735-019-0, paper 9)

7.       Huang, W.M., Yang, B., Liu, N., Phee, S.J., Water-responsive programmable shape memory polymer devices, International Conference on Smart Materials and Nanotechnology in Engineering, 1st -4th July, 2007, Harbin, China (invited), SPIE Vol. 6423, 2007, pp64231s-1-7

 

2006

8.       Gao, X.Y., and Huang, W.M., Shape memory motor directly powdered by solar energy for space missions, Proceedings of the 2006 IEEE International Conference on Mechatronics and Automation, June 25-28, 2006, Luoyang, China, pp243-248

9.       Liu, N. and Huang W.M., DSC study on temperature memory effect of NiTi shape memory alloy, 5th International Forum on Advanced Materials Science and Technology (IFAMST5), 11-14 June, 2006, Xiangtan, China

10.   Gao, X.Y. and Huang, W.M., Novel shape memory alloy motor for space missions, The New Challenges in Aerospace Technology and Maintenance Conference 2006 (NCATMC 2006), 17-18, February, 2006, Singapore

 

2005

11.   Hu, Y., Oh, K., Huang, W., Determination of stress-strain relationships of a NiTi shape memory alloy in tension and compression by four-point bending test, International Conference on Mechanical Engineering and Mechanics, October 26-28, 2005, Nanjing, China, pp937-940

12.   Cai, M., Langford, S.C., Dickinson, J.T., Huang, W.M., He, Q., Droubay, T.C. and Baer, D.R., Study of martensitic transformation in a CuZnAl shape memory alloy using photoemission, International Conference on Mechanical Engineering and Mechanics, October 26-28, 2005, Nanjing, China, pp1123-1127

13.   Huang, W.M., Wu, J.A., Vahhi. I.E., Softening phenomenon in a Cu-Al-Ni shape memory alloy under compression, Proceedings of the 6th International Conference "Assessment of Reliability of Materials and Structures: Problems and Solutions", St. Petersburg, Russia, June 14-17, 2005, pp530-534

14.   Huang, W.M., On the evolution of the Young’s Modulus in SMAs upon mechanical loading, International Conference on Martensitic Transformations, June 14-17, 2005, Shanghai, China, pp113

 

2004

15.   Gao X.Y., Huang W.M. and Liu G.R., 3-D yield surface of shape memory alloys with variable Young’s modulus upon stress induced phase transformation, The International Conference on Computational Methods (ICCM 2004), 15-17, December 2004, Singapore

16.   Huang, W.M., Li, C. and Lee, E.K., Two-way shape memory alloy springs produced by re-heat treatment method, 3rd International Conference on Materials Processing for Properties and Performance, 24-26 November 2004, Singapore

17.   Vahhi, I., Chikiryaka, A. and Huang, W., Two way shape memory effect initialized by second heat treatment in NiTi, in Proceedings of III International Conference on Phase Transformation and Strength of Crystals, Chernogolovka, Russia, 20-24 September, 2004, pp140

18.   Yang, B., Huang, W.M. and Li, C., Nano carbon particle filled conductive shape memory polymer, Nanotech 2004, 13-17 July 2004, Singapore 

19.   Wu, M.J., Huang, W.M. and Chollet, F., In situ characterization of NiTi based shape memory thin films by optical measurement, Thinfilm 2004, 13-17 July 2004, Singapore 

20.   Huang, W.M., He, Q., Hong, M.H., and Gao, X.Y., Numerical investigation of CO2 laser annealing of Ni/Ti multilayer (shape memory) thin films, Thinfilm 2004, 13-17 July 2004, Singapore 

21.   Du, H., Fu, Y., Hu, M., Zhang, S. and Huang, W., TiNi thin film micro actuators: design and realization, in Proceedings of Smart Materials for Engineering and Biomedical Applications (SMEBA’04), Suzhou, China, May 16-19, 2004, pp281-290

22.   Huang, W.M., Lee, C.W. and Teo, H.P., Thermomechanical behavior of a polyurethane shape memory polymer foam and applications, in Proceedings of Smart Materials for Engineering and Biomedical Applications (SMEBA’04), Suzhou, China, May 16-19, 2004, pp251-259

23.   Huang, W.M. and Ng, W.L., Effects of pre-straining in reheat treatment on NiTi two-way shape memory alloys, in Proceedings of Smart Materials for Engineering and Biomedical Applications (SMEBA’04), Suzhou, China, May 16-19, 2004, pp244-250

24.   Wu, M.J., Huang, W.M., Chollet, F.A., He, Q., Hong, M.H., Fu, Y.Q. and Du, H.J., Surface characterization of sputtering deposited NiTi and NiTiCu shape memory thin films, in Proceedings of International Conference on Precision Engineering (ICoPE2003/04), 2-5 March 2004, Singapore, pp587-594

 

2003

25.   Huang, W.M. and Zhang, W.H., Surface relief phenomenon in a NiTi shape memory alloy rod, Photonics: Design, Technology, and Packaging, 10-12 December, 2003, Perth, Australia, SPIE Vol. 5277, 2004, pp198-205

26.   He, Q., Huang, W.M., Hong, M.H., Chong, T.C., Fu, Y.Q. and Du, H.J., CO2 laser annealing of RF magnetron sputtered NiTi thin films, 4th International Symposium on Laser Precision Microfabrication, Munich, June 21-24, 2003, SPIE Vol. 5063, 2003, pp319-322

 

2002

27.   Huang, W.M., Zhang, W.H. and Gao, X.Y., Micro mirror based on surface relief phenomenon in shape memory alloys, Photonics Asia 2002, 14–18 October 2002, Shanghai, China, SPIE Vol. 4918, 2002, pp155-161

28.   Huang, W.M., He, Q., Hong, M.H., Xie, Q., Fu, Y.Q. and Du, H.J., On the fabrication of NiTi shape memory alloy micro devices using laser, Photonics Asia 2002, 14–18 October 2002, Shanghai, China, SPIE Vol. 4915, 2002, pp234-240

29.   Gao, X.Y. and Huang, W.M., Thermomechanical behavior of shape memory alloys under non-proportional load, Photonics Fabrication Europe 2002, Congress Centre Oud Sint-Jan Brugge, Belgium, 28 October - 1 November 2002, SPIE Vol. 4946, 2003, pp183-191

30.   Huang, W., Liu, Q.Y. and Ong, L.F., Assembly of hard disk drive using shape memory alloys, Asia-Pacific Magnetic Recording Conference (APMRC'02), 27-29 August, 2002, Singapore, ppTU-P-05-01:02

31.   Huang, W., Failure of aluminum and polymer foams under multiaxial loads, Proceedings of XXX Summer School, "Advanced Problems in Mechanics" (APM'2002), 27 June - 6 July, 2002, St Petersburg, Russia, pp 269-274

32.   Huang, W., Yield Surfaces of shape memory alloys with multi-phase transformations, Proceedings of XXX Summer School, "Advanced Problems in Mechanics" (APM'2002), 27 June - 6 July, 2002, St Petersburg, Russia, pp 275-279

33.   Liu Q., Zhu J., Huang W. and Liew K.M., Twinning structure in tetragonal to monoclinic martensitic transformation, First International Conference on Multiscale Materials Modelling (MMM'2002), June 17-20, 2002, London, UK

34.   Zhu J., Huang W., Liu Q. and Liew K.M., To simulate the behavior of shape memory alloys under thermomechanical cycling, First International Conference on Multiscale Materials Modelling (MMM'2002), June 17-20, 2002, London, UK

35.   Zhu, J.J., Huang, W. M. and Liew, K.M., Deformation energy in martensitic transformation, International Conference on Martensitic Transformations (ICOMAT'02), 10-14 June 2002, Espoo, Dipoli, Finland, pp100

36.   Liu, Q., Huang, W. and He, L., Performance of NiTi thin film micro gripper actuated by electrical current, Mechanics and Materials in Design (M2D-4), The Fourth International Conference in Nagoya, Japan, June 5-8, 2002, pp43

37.   Xie, Q., Huang, W., Hong, M. and Chong, T. C., Excimer laser annealing of NiTi shape memory alloy thin films, International Congress on Laser Advanced Materials Processing (LAMP2002), 27-31 May, 2002, Osaka, Japan, SPIE Vol. 4830, pp403-407

 

2001

38.   Huang, W.M., Gao, X.Y. and Tan , J.P., Design of thin film based micro grippers, SPIE: Optoelectronics and Microelectronics, 7-10 November, 2001, Nanjing, China, SPIE Vol. 4601, 2001, pp123-130

39.   Huang, W. M., Gao, X.Y. and Tan, J.P., Design of micro grippers for biomedical applications, BioMedical Asia 2001, 19-21 September 2001, Singapore International Convention and Exhibition Centre, Singapore

40.   Huang, W.M., Gao, X.Y., Kung, H.K., Liu, Q.Y., Ng, Q. and Liu, X., Hard disk drive assembly using copper based shape memory alloy, The International Conference on Superelastic Technologies and Shape Memory Materials (SMST-SMM 2001), 2-6 September, 2001, Kunming, China, pp56

41.   Huang, W.M., Gao, X.Y., Loo, B.K., He, L.M. and Ngoi, B.K.A., Micro gripper using two-way shape memory alloy thin sheet, The International Conference on Superelastic Technologies and Shape Memory Materials (SMST-SMM 2001), 2-6 September, 2001, Kunming, China, pp43

42.   Zhu, J.J., Huang, W.M. and Liew, K.M., On the description of transformation in DO3 to 18R shape memory alloys using group theory, in IUTAM Symposium on Mechanics of Martensitic Phase Transformations in Solids, Proceedings of the IUTAM Symposium held in Hong Kong, China, 11-15 June 2001, Ed. Sun, Q. P., Kluwer Academic Publishers, pp163- 170 (invited paper) (peer reviewed)

43.   Tan, J.P., Gao, X., Huang, W., Yeo, J.H. and Miao, J.M., NiTi shape memory alloy thin film based micro gripper, SPIE’s 2000 symposium on Smart Materials and MEMS, 11-15 December 2000, Melbourne, Australia, SPIE Vol.4234, 2001, pp106-112

44.   Gao, X.Y. and Huang, W.M., Simulation of novel micro-assembly using shape memory alloy, SPIE’s 2000 symposium on Smart Materials and MEM, 11-15 December 2000, Melbourne, Australia, SPIE Vol. 4235, 2001, pp108-116

45.   Huang, W.M., Liu, Q.Y., Zhu, J.J. and Gao, X.Y, A general yield criterion and its application in smart materials, Eight Annual International Conference on Composites Engineering (ICCE/8), August 5-11, 2001, Tenerife, Canary Islands, Spain, pp371-372

46.   Huang, W.M., A general yield criterion and its applications in non-crystalline materials, Asian Pacific Conference on Fracture and Strength'01 and International Conference on Advanced Technology in Experimental Mechanics'01, October 20-22, 2001, Sendai International Center, Sendai, Miyagi Prefecture, Japan, in Proceedings of APCFS & ATEM'01, Published by The Japan Society of Mechanical Engineers, No. 01-203, pp899-904 (peer reviewed)

47.   Huang, W.M. and Gao, X.Y., Novel micro-assembly using shape memory alloy, Asian Pacific Conference on Fracture and Strength'01 and International Conference on Advanced Technology in Experimental Mechanics'01, October 20-22, 2001, Sendai International Center, Sendai, Miyagi Prefecture, Japan, in Proceedings of APCFS & ATEM'01, Published by The Japan Society of Mechanical Engineers, No. 01-203, pp905-910 (peer reviewed)

48.   Huang, W.M., Tang, J. P., Liu, Q.Y., Gao, X.Y., Yeo, J.H., Miao, J.M., He, L.M. and Ngoi, B.A.K., Si-NiTi shape memory alloy tweezers, Proceedings of the International MEMS Workshop 2001, pp603-611

49.   Huang, W.M. and Yeo, J.H., Micro gripper for medical applications, Fourth Annual NTU-SGH Biomedical Engineering Symposium, pp27-28

50.   Gao, X., Huang W. and Zhu, J., Modeling and simulation of shape memory alloy based devices using a real multi-dimensional model, in IUTAM Symposium on Smart Structures and Structronic Systems, Proceedings of the IUTAM Symposium Held in Magdeburg, Germany, 26-29 September 2000, Edited by: U. Gannert and H.S. Tzou, Kluwer Academic Publishers, pp137-144

 

2000

51.   Tan, J.P., Gao, X., Huang, W., Yeo, J.H. and Miao, J.M., NiTi shape memory alloy thin film based microgripper, SIBA2000, Du 28 juin au 1er juillet 2000, Montréal, Canada, pp14

52.   Zhu, J.J., Liang, N.G., Liew, K.M. and Huang, W.M., Energy conversion in shape memory alloy heat engine. Part I: theory, Mechanics and Materials in Design 3, May 29-31, 2000, Orlando, pp216

53.   Zhu, J.J., Liang, N.G., Huang, W.M. and Liew, K.M., Energy conversion in shape memory alloy heat engine. Part II: simulation, Mechanics and Materials in Design 3, May 29-31, 2000, Orlando, pp217

54.   Fu, Y., Du, H., Huang, W., Huang, X., Mao, J. and Liu, Y., Preparation of crystalline NiTi shape-memory thin film for MEMS applications, SPIE’s International Symposium on Microelectronics and Assembly (ISMA 2000), 27 November - 2 December 2000, Singapore, (SPIE Vol. 4230), pp140-146

 

1999

55.   Huang, W.M., Shape memory alloy micro actuators: review and numerical simulation, 9th MINDEF-NTU Joint R&D Seminar, Nanyang Technological University, January, 1999, pp221-226

56.   Huang, W., Two-Way Behavior of a Nitinol torsion bar, SPIE's Smart Structures and Materials 1999, 3-4 March 1999, Newport Beach, California, USA, (SPIE Vol.3675), 1999, pp284-294

 

1997

57.   Huang, W. and Pellegrino, S., Nitinol actuators for deployable space structures, SMST-97: Proceedings of the Second International Conference on Shape Memory and Superelastic Technologies, Asilomar Conference Center, Pacific Grove, California, USA, 1997, pp305-310

 

1996

58.  Huang, W., Pellegrino, S. and Bashford, D. P., Shape memory alloy actuators for deployable structures, Proc. Conference on Spacecraft Structures, Materials & Mechanical Testing, Grand Hotel Huis ter Duin, Noordwiik, The Netherlands, 27-29 March 1996 (ESA SP-386, June 1996), pp53-61

 

Book/Chapter

1.       Miyazaki, S., Fu, Y.Q. and Huang, W.M., Thin film shape memory alloys – properties, characterization and applications, Cambridge University Press (in preparation)

2.       Huang, W.M. and Zhu, J.J., Failure/yield surface of materials: a view from strain space, in New Materials Science Research, Nova Science Publisher (invited contribution, accepted)

3.       Huang, W.M., Yang, B., Wooi, L.H., Mukherjee, S., Su, J. and Tai, Z.M., Formation and adjustment of bubbles in a polyurethane shape memory polymer, in Materials Science Research Horizons, Nova Science Publishers, 2007 [ISBN: 1-60021-481-9], pp235-250 (Invited contribution)

4.       Huang, W.M. and Gao, X.Y., Yield surface of shape memory alloys, in Trend in Materials Science Research, Nova Science Publishers, 2005 [ISBN: 1-59454-367-4], pp101-115 (Invited contribution)

 

In Magazine/News

1.       Water shifts rubber's shape [reported as brief in Technology Research News (USA)]

      http://www.trnmag.com/Stories/2005/040605/Water_shifts_rubber's_shape_Brief_040605.html

2.       Shape-memory polymers: Made in chain [highlighted by Nature.China]

      http://www.nature.com/nchina/2008/080130/full/nchina.2008.24.html

3.       Lan, X., Huang, W.M., Leng, J.S., Liu, N., Phee, S.J. and Yuan, Q., Electrically conductive shape-memory polymer with anisotropic electro-thermo-mechanical properties, GAK Gummi Fasern Kunststoffe (German translation, invited lecture, in press)