Reports/projects by Undergraduate Students
FYP: Final Year Project
URECA: Undergraduate Research Experience on Campus
UROP: Undergraduate Research
Opportunities Programme
|
1998-1999 |
||
|
|
UROP |
|
|
1 |
Wong Yew Leong |
Effects of pre-strain on the transformation temperatures of NiTi shape memory alloys[1] |
|
2 |
Tey Shaw-Jiann Gary |
Novel shape memory alloy "fuse" for electrical circuit protection |
|
3 |
Ng Koon Ai |
Phase transformation front movement in NiTi shape memory alloy |
|
1999-2000 |
||
|
|
UROP |
|
|
1 |
Khor Choo Chyan |
Milli-gripper with two degrees of freedom using shape memory alloy |
|
2 |
Toh William |
Training two-way shape memory alloy by reheat treatment[2] |
|
3 |
Lu Wai Hong |
Phase transformation front movement in TiNi shape memory alloy wire |
|
|
FYP |
|
|
1 |
Teu Soo Chen |
Grain boundary effects in shape memory alloy |
|
2 |
Ng Chee Kin |
Shape memory alloy heat engine |
|
3 |
Chua Wei Pin |
Shape memory alloy based inchworm |
|
4 |
Tey Shaw-Jiann |
Long term thermomechanical stability of cold hibernated elastic memory shape memory foam |
|
5 |
Lian Shi-Er
Benjamin |
Shape memory alloys based aquatic biomimetics |
|
2000-2001 |
||
|
|
UROP |
|
|
1 |
Teo Beng Koon William with Dr Cheng I-Ming |
Control and applications of shape memory alloy wire bundles |
|
|
FYP |
|
|
1 |
Chua Ming She (part-time) |
Composite with embeeded SMA fiber for minimization of thermally induced expansion |
|
2 |
Goh Han Boon |
Training of two-way shape memory alloy by reheat treatment: determination of long-term stability and optimum reheat treatment condition |
|
3 |
Kung Hwei
Kuok |
Relaxation in shape memory alloy |
|
4 |
Loo Boon Keng |
Two-way shape memory alloy based micro gripper |
|
5 |
Ong Li Fung |
Shape memory alloy for micro assembly |
|
2001-2002 |
||
|
|
UROP |
|
|
1 |
Rinov Herawan with Dr Cheng I-Ming |
Control and application of shape memory alloy thin wire |
|
FYP |
||
|
1 |
Huang Ean
Khim (part-time) |
Retractable Roof |
|
2 |
Teo Hoon Peng |
Thermomechanical Behavior of Shape Memory Polymer Foam |
|
3 |
Lee |
Application of Shape Memory Polymer |
|
4 |
Kua Soo Han |
|
|
5 |
Tan Wee Lee |
CuZnAl Shape Memory Alloy for Hard Disk |
|
6 |
Lee Eng Kwang |
Design of Shape Memory Alloy Spring |
|
7 |
Chong Yong Thye |
Measurement of Phase Transformation in Shape Memory Alloys Using Vibration Analysis |
|
8 |
Lim Swee Cheng |
3D Micro-Assembly for Tissue Engineering (NUS, with Dr Etienne Burdet etc.) |
|
2002-2003 |
||
|
|
UROP |
|
|
1 |
Lim Kean Hee |
Energy Dissipation and Evolution of the Young's Modulus of Martensitic NiTi Shape Memory Alloy Wire upon Cyclic Loading |
|
FYP |
||
|
1 |
Ng Wei Lee Ben |
Effect of Pre-Stressing on the Transformation Temperatures in Training a Two-Way Shape Memory Alloy |
|
2 |
Lee Chow Ming |
On the Effects of Moisture in the Glass Transition Temperature of a Shape Memory Polymer |
|
3 |
Loh Yen Ju |
Design of Finger Reading System for Blind Man with Shape Memory Alloys |
|
4 |
Chan Kee Chor
Alex |
Applications
of Shape Memory Polymer in Bio-Micro Devices: Micro Tag |
|
5 |
Kwek Chin Soon Daniel |
Stress Evolution in Shape Memory Alloy Wires upon Thermal Cycling |
|
6 |
Ng Lim Hing Michael with Dr Guo Ning Qun |
Alternative Approaches for Characterization of Shape Memory Alloys |
|
7 |
Chin Jiun
Bing (part-time) |
Shape Memory Alloy Micro Gripper with Multi-Degree-of-Freedoms |
|
2003-2004 |
||
|
|
UROP |
|
|
1 |
Yeong Chee Kai with Dr Mai Tuan Anh (SIMTech) |
Microstructuring of Glass by Laser Glass Milling |
|
FYP |
||
|
1 |
Chua Siew Lim |
Characterization of Shape Memory Alloy (SMA) Wire Based on Resistance Measurement |
|
2 |
Lim Bee Yan |
On the Evolution of the Young's Modulus and Energy Dissipation in NiTi Shape Memory Alloy Wires |
|
3 |
Chor Jun Hoe |
Characterization of Shape Memory Materials by Dynamic Mechanical Analysis |
|
4 |
Chan Yew Sum, Sunny |
Fabrication
and Testing Shape Memory Polymers |
|
5 |
Ng Shu Bing with Dr Shu DW |
Effect of Strain Rate on the Behaviour of Shape Memory Alloy |
|
6 |
Goh Soo Loon (part-time) |
Design of Shape Memory Alloy (SMA) Based Actuator |
|
7 |
Tan Teck Leong (part-time) |
Design of Shape Memory Polymer Based Device |
|
2004-2005 |
||
|
FYP |
||
|
1 |
Chan Siong Yee |
Effect of moisture on mechanical properties of conductive shape memory polymer |
|
2 |
Lim Shiuh
Mei |
Microindentation of NiTi film on an aluminium substrate |
|
3 |
Wooi Lian Hong |
Investigation of shape memory materials |
|
4 |
Leng Sze
Chah |
Influence
of surface condition on microindentation |
|
5 |
Oh Keng Cheng |
Using 4-point bending data to derive tensile and compressive curves and carrying out fractal dimension analysis on NiTi alloy |
|
2005-2006 |
||
|
FYP |
||
|
1 |
Tan Lee Huang |
Influence of moisture on magnetic shape memory polymer |
|
2 |
Siow Gee Jye with Dr Fan H |
Experimental study on micro-scale friction |
|
3 |
Siew Seng Yeow |
Fabrication micro devices using shape memory polymer |
|
4 |
Tan Shai
Zhi Gemi |
Wrinkling
of thin metallic film atop of shape memory polymer |
|
5 |
Aaron Rajoo
with Dr Zhao Y |
An experimental investigation of the hydrodynamic behavior of a fish swimming |
|
6 |
|
Influence of surface condition on microindentation |
|
7 |
Goh Sujuan |
Wrinkling in metallic thin film deposited atop of shape memory substrates |
|
8 |
Phay
Yee How |
Active disassembly using shape memory polymers |
|
2006-2007 |
||
|
FYP |
||
|
1 |
Ng Zhan Chao |
Characterization of polyurethane shape memory polymer mixed with palygorskite clay |
|
2 |
Lee Mingxiong, Paul with Dr Nguyen Nam Trung |
Reversible micro bubbles in a shape memory polymer |
|
3 |
Tan Tick Joo with Dr |
Design a lift mechanism for micro hard disk |
|
4 |
Lim Hui Yu with Dr Fan Hui |
Finite
element analysis for failure in LCD panel in bending |
|
5 |
Chen Yahui with Dr |
A study of flapping pattern and wing structure of dragonfly (Odonata) |
|
6 |
Eugene Goh Teck Guan with Dr |
Surface work-hardening of metals & polymers |
|
7 |
Han Ji |
Size and shape effect on surface tension in pulling cones out of water and oil |
|
8 |
Chan Cheng Siong |
Conductive shape memory polymer thin films |
|
9 |
Ang Ee Yang with Yang Chun, Charles |
Influence
of surface morphology on surface stress in shape memory alloy |
|
10 |
Chew Kian
Leong, Daniel |
Patterning atop shape memory polymer |
|
11 |
Chan Zigeng with Dr Xie Qiong, DSI |
Laser fabrication of micron/nano sized features atop shape memory polymer |
|
12 |
Lin Zijing |
Deformation pattern in stretching a tube |
|
13 |
Chen Chee Chye with Dr Fan Hui |
Experimental study on friction between smooth surfaces |
|
14 |
Chean Jin Yan |
Temperature memory effect in shape memory alloy |
|
15 |
Ho Ching Mun,
Vincent |
Influence of pre-strain on Vickers hardness number of aluminum alloy 6061 |
|
16 |
Myo
Nyi Nyi (part-time) |
Designing a shape memory alloy actuating system |
|
17 |
Gay
Choon Keat, Alvin (part-time) |
Design of a multi-package device carrier |
|
2007-2008 |
||
|
URECA |
||
|
1 |
Zhou Yansheng |
Experimental study of micro-friction |
|
|
FYP |
|
|
1 |
Liu Jinpeng |
Influence of chained Ni powders on electrical resistivity of paraffin wax filled with carbon black |
|
2 |
Wang Guozuan
Adrian |
Influence of pre-deformation on the indentation of aluminum alloy |
|
3 |
Daniel Chong |
Stimulation of shape-recovery in SMP composites by an alternative method of heating |
|
4 |
Yapp Parry Edgar |
Solar
engine using shape memory alloy |
|
5 |
Lin Junqiang |
Formation of micro/nano sized protrusion arrays atop shape memory polymer |
|
6 |
Ang Mei Ting with Dr Sutthiphong Srigrarom |
An experimental investigation of the effect of thin film extension on mechanical fish propulsion |
|
7 |
Wang Zhaomeng with Dr Zhao Yong |
Numerical study of fluid flow over complex wall surface structures |
|
8 |
Cen Jinfeng Royce with Dr Li Lin |
Fabrication and characterization of ultrathin polymeric film |
|
9 |
Pan Jiahui with Dr Fan Hui |
An experimental study of liquid spreading on pattern surface |
|
10 |
Soh Yong Jin with Dr Fan Hui |
An experimental investigation of indentation size effect in aluminum and silicon wafer |
|
11 |
Low Kok Chang (part-time) |
Dynamic increase factor |
|
2008-2009 |
||
|
URECA |
||
|
1 |
Albert Darren Soetarto |
2-D rolling car |
|
2 |
Liew Kok Cherng |
Pressure responsive shape memory polymer |
|
3 |
Wei Jun |
A new shape memory material system |
|
|
UROP |
|
|
1 |
Teo Qing Ren |
Novel shape memory materials |
|
|
FYP |
|
|
1 |
Ho Xiao Ting Stephane with Dr Fan Hui |
Experimental characterization of heterogeneous materials |
|
2 |
Eric Charlie |
Micro
pump using shape memory alloy thin films |
|
3 |
Tay Zhen Yao |
Self recoverable structure/material |
|
4 |
Tay Si Ying Sharon with Dr Chen Yan |
Morphing structures |
|
5 |
Lim Chuan Kai |
Shape restoration using shape memory materials |
|
6 |
Goh Chee Siew with Dr Q Xie (DSI) |
Laser assisted micro patterning atop shape memory polymer |
|
7 |
Teo Jun Wei |
Characterization of silicone-carbon black polymer composites |
|
8 |
Lee Chia Seah with Dr Fan Hui |
Experimental study of liquid spreading on pattern surface |
|
9 |
Tay Wei Jie |
Reversible dimples for unmanned aviation vehicles |
|
10 |
Ang Rong
Hong with Dr Fan Hui |
Liquid droplet spreading on rough surfaces |
|
11 |
Liu Ga Seng |
Wing morphing in UAV using shape memory polymer |
|
12 |
Khusbir Kaur Chail with Dr Li Chuan |
Fabrication and characterization of microshape memory polymer beads |
|
13 |
Yong Wei Ming with Dr
Li Chuan |
Electrical conductivity of silicone filled with carbon fillers |
|
14 |
Yuan Quan (part-time) |
Electrical conductivity and thermo-mechanical properties of a polyurethane shape memory polymer filled with aligned micro-sized Ni powders |
|
15 |
Nyein Nyein Ei (part-time) |
Testing and analysis of shape memory materials |
|
16 |
Wong Hai Chiu (part-time) |
Smart actuator using shape memory alloys |
|
17 |
Soon Kian
Ling (part-time) |
Design of shape memory hybrid |
|
2009-2010 |
||
|
URECA |
||
|
1 |
Cheah Wei Shin |
2-D rolling car |
|
2 |
Loy Hui Peng |
Sunlight active shape memory alloy heat engine |
|
UROP |
||
|
1 |
Yap Soon Ann |
Shape recovery active by cooling |
|
FYP |
||
|
1 |
Chia Qiu
Yan |
Reversible dimples for unmanned aviation vehicles |
|
2 |
Chia Jia
Liang |
Fabrication and characterization of polyurethane shape memory polymer |
|
3 |
Huang Ruixiang |
Artificial bat wing |
|
4 |
One Shang Cheng David |
Active disassembly of obsolete hand phones using shape memory materials |
|
5 |
Koe Ju Jin Sean |
Investigation into 2-D/3-D buckling of microfibers/wires atop/within polymer/gel |
|
6 |
Leong Chong Han with Dr Low Kin Huat |
Design and development of UAV launcher for use in motion capturing experiment |
|
7 |
Fu Weiming |
Fabrication and characterization of shape memory polymer composites |
|
8 |
Ong Song Yi with Dr Zheng Lianxi |
Polymer composites with aligned carbon nanotubes for high performance |
|
9 |
Wei Jun |
Novel shape memory materials |
|
10 |
Liew Kok Cherng with Dr Zheng Lianxi |
Design and characterization of silicone-sodium acetate shape memory hybrid |
|
11 |
Low Choon Teng, Fablian with Dr Zheng Lianxi |
Towards the delivery of nano-device for functioning in a living cell |
|
12 |
Xue Gui
Yao (part-time) |
Concepts of active disassembly using shape memory polymer |
|
2010-2011 |
||
|
URECA |
||
|
1 |
Chia Jiun Wei |
Smart material for magicians |
|
FYP |
||
|
1 |
Lim Li Wen with Dr Zheng Lianxi |
Towards the delivery of nano devices for the functioning inside a living cell |
|
2 |
Jiang Mengyuan |
Shape memory effect in biodegradable polymer |
|
3 |
Ong Fu Lin with Dr Fan Hui |
Experimental study of liquid spreading on pattern surface |
|
4 |
Chan Huang Boon Lester |
Novel shape memory materials |
|
5 |
Chan Shi Yi |
Nano sized devices with shape memory |
|
6 |
Lau Shi Wan Priscilia with Dr Zheng Lianxi |
Polymer composites with aligned carbon nanotubes for high performance |
|
7 |
Ting Leong Hee |
Self healing material for terminator VI |
|
8 |
Cheah Wei Shin |
2-D micro rolling car active by shape memory alloy |
|
9 |
Xu Wei Wei |
Active disassembly of obsolete handphones using shape memory materials |
|
10 |
Chew Bang Wei |
Morphing wing concept for unmanned aerial vehicle (UAV) |
_________________
[1] Poster presentation, National Undergraduate Research Opportunities Programme Congress 1999
[2] Plenary presentation, National Undergraduate Research Opportunities Programme Congress 2000