50 Nanyang Avenue
Singapore 639798
Fax: 65-67911859
Email Address: mhqgong@ntu.edu.sg
1991 Ph.D. University of Delaware , USA
1987 M.S. University of Delaware , USA
1982 B.S. Wuhan University of Technology, China
1990-1993 Research Fellow, Nanyang Technological University (NTU), Singapore
1993-1996 Lecturer, Nanyang Technological University, Singapore
1996-1998 Senior Lecturer, Nanyang Technological University
1999-present Associate Professor, Nanyang Technological University
1996-1999 Co-Director, Energy Systems Laboratory, NTU
1996-2000 Founding Director, MicroMachines Center, NTU
1996-2002 Director, MEMS Strategic Research Program, NTU
2000-present Founding Director, BioMEMS Laboratory, NTU
2002-present Director, BioMEMS Strategic Research Program, NTU
2003- present Joint-program Director, Dual Degree Master of Science in Micro Electromechanical Systems Engineering (a joint program with ESIEE, France)
Reserach Interests:
Biochips for genetic analysis
Microfluidics
Genetic testing instrument
Micro drug delivery system
Micro and nanofabrication processes
Rapid prototyping processes
Selected Funded Research Projects:
"A handheld genetic testing system for simultaneous detection of multiple water borne pathogens", 2007-2009, funded by EWI, Ministry of Environment.
"Using a molecular signature for himan hepatocellular carcinoma as a proof-of-concept experiment for designing cancer diagnostic nano chips", 2005-2008, Funded by A*STAR and Biomedical Research Council.
"BioMEMS: Development and applications of DNA microdevices for biology and medicine". 1999-2003, Funded by A*STAR and Biomedical Research Council.
"Development of an automated sample preparation and biochip-based integrated PCR array analytical system for the screening of SARS and selected upper respiratory tract infectious viruses in patient samples". 2003-2004, Funded by Biomedical Research Council.
"Development of electrochemilluminescence immunoassay (ECLIA) biochip for ultra-sensitive early-stage detection of SARS virus". 2003-2005, Funded by Biomedical Research Council.
"High Throughput Genetic Laboratory Biochip and Critical Applications", 2003-2004, TEC Fund.
"Using a molecular sgnature for himan hepatocellular carcinoma as a proof-of-concept experiment for designing cancer diagnostic nano chips". 2005-2008, Funded by Biomedical Research Council.
"Rapid design, prototyping and tooling". 1997-2001, NSTB.
"UV laser micro-machining of MEMS", 1997-2000, AcRF.
"Realisation of desktop 3D printer through micromachined active pump matrix", 1998-2001, AcRF.
Selected Publications:
Hao-Bing Liu, Hai-Qing Gong, Naveen Ramalingam, Yu Jiang, Chang-Chun Dai, and Kam M. Hui, “Micro air bubble formation and its control during polymerase chain reaction (PCR) in polydimethylsiloxane (PDMS) microreactors”, Journal of Micromechanics and Microengineering, 17 (2007) 2055-2064.
Haiqing Gong, Naveen Ramalingam, Longqing Chen, Xinhao Yang, Peng Huat Eric Yap, Chiew Hoon Neo, “Microfluidic handling of PCR solution on a reaction chamber array biochip”, Biomedical Microdevices. 2006, 8: 167–176.
G.Y. Tang, D.G. Yan, C. Yang, H.Q. Gong, C.J. Chai, and Y.C. Lam, “Assessment of Joule heating and its effects on electroosmotic flow and electrophoretic transport of solutes in microfluidic channels”, Electrophoresis, Vol. 27, 2006, p.628-639.
G.Y. Tang, C. Yang, H.Q. Gong, C.J. Chai, and Y.C. Lam, “Numerical simulation of Joule heating effect on sample band transport in capillary electrophoresis”, Analytica Chimica Acta, Vol. 561, 2006, p.138-149.
Dafeng Chen, Hejun Du, Weihua Li, Haiqing Gong, “Dielectrophoresis of Microparticles with Planar Microelectrode Systems”, Key Engineering Materials Vols. 326-328 (2006) pp. 253-256.
Dafeng Chen, Hejun Du, Weihua Li, Haiqing Gong, “Holding Capacity of A Dielectrophoretic Barrier for Microparticles”, Key Engineering Materials Vols. 326-328 (2006) pp. 281-284
Huey Fang Teh, Haiqing Gong, Xian-Dui Dong, Xiangting Zeng, Annie Tan Lai Kuan, Swee Ngin Tan, “Electrochemical biosensing of DNA with capture probe covalently immobilized onto glassy carbon surface”, Analytica Chimica Acta, 2005, Vol. 551, Issues 1-2, p 23-29.
Tang GY, Yang C, Gong HQ, Chai CJ, Lam YC, “On electrokinetic mass transport in a microchannel with Joule heating effects”, Journal of Heat Transfer, 2005, 127 (6): 660-663.
Hong WB, Gong H, Lee YT, “A study of the staircase effect induced by material shrinkage in rapid prototyping”, Rapid Prototyping Journal, Vol.11 No.2, 2005, p. 82-89.
HF Teh, X H Yang, H Gong, S N Tan, “Voltammetric and Differential Pulse Stripping Study of Adenine on a Sol-gel derived Carbon Composite Electrode”, Electroanalysis, 2004, 16, No.7, p.1-5.
G. Y. Tang , C. Yang , C. K. Chai and H. Q. Gong, “Numerical analysis of the thermal effect on electroosmotic flow and electrokinetic mass transport in microchannels”, Analytica Chimica Acta, Volume 507, Issue 1, 1 April 2004, Pages 27-37.
Hong Wenbin, Lee Yong Tsui and Gong Haiqing, “Thermal analysis of layer formation in a stepless rapid prototyping process”, Applied Thermal Engineering, 2004, Vol. 24, No. 2, pp255-268.
Tang GY, Yang C, Gong H, “Joule heating effect on electroosmotic flow and mass species transport in a microcapillary”. International Journal of Heat and Mass Transfer. 2004, Vol. 47, pp. 215-227.
Xinhao Yang , Lin Hua, Haiqing Gong, Swee Ngin Tan, “Covalent immobilization of an enzyme (glucose oxidase) onto a carbon sol.gel silicate composite surface as a biosensing platform”, Analytica Chimica Acta, 2003, 478, 67-75.
Tang G.Y, Yang, C., Chai, C.J., Gong H.Q. “Modeling of Electroosmotic Flow and Capillary Electrophoresis with the Joule Heating Effect: the Nernst-Planck Equation versus the Boltzmann Distribution”. Langmuir. 2003, Vol.19, pp 10975-10984.
Wang,Q.H., Tan,Y. Gong, H, “An Integrated System for Real-time PCR Analysis Based on Micro-fluidic Biochip”, International Journal of Computational Engineering Science, 2003. Vol. 4, No. 2 p285-288.
Zhang Xuanxiong Zhang, Xujiang He, Yuan Xu, H. Gong, Francis Eng Hock Tay, “An Improved Approach for Precise in Situ Measurements of Microflows”. Review of Scientific Instruments, 2002, Vol.73, p1185-1187.
X.D. Wang, G.D. Hong, J. Zhang, B.L. Lin, H. Gong, W.Y. Wang, “Precise patterning of diamond films for MEMS application.” Journal of Materials Processing Technology. 2002, Vol.5757, p1–4.
J Zhang, K L Tan, G D Hong, L J Yang and H Gong, “Polymerization optimization of SU-8 photoresist and its applications in microfluidic systems and MEMS”, Journal of Micromechanics and Microengineering, Volume 11, Number 1, January 2001, p20-26.
Shearwood, C, Ho, K Y, Williams, C B, Gong, H, “Development of a levitated micromotor for application as a gyroscope”, Sensors and Actuators, 83, 2000, p85-92.
Ainsley, C, Gong, H, “Precision sintering of slip cast components”, Journal of materials processing technology, 1999, Vol.95, pp201-209.
Ainsley, C, Gong, H, “Cost and performance of injection moulding tools produced using slip casting”, Rapid prototyping journal, 1999, Vol 5, No1, pp 35-44.
Zou, QB, Wang, ZF, Gong, H, et al, "A novel integrated silicon capacitive microphone: floating-electrode-electret-microphone (FEEM)", IEEE/ASME Journal of Microelectromechanical Systems, Vol. 7, No. 2, 1998, pp. 224-234.
Zou QB, Wang ZF, Gong, H, et al, “A study on corrugated diaphragms for high sensitivity structures”, Journal of Micromechanics and Microengineering, Vol.7, 1997, pp310-315.
Gong, H, Lim, MK, “Vibration characteristics of sandwich beams partially and fully treated with electro-rheological fluid.” Journal of Intelligent Material System and Structures, Vol.8, March, 1997, pp1-13.
Huang, XY, Liu, CY, Gong, H, “A viscoplastic flow modeling of ceramic tape casting.” Material and Manufacturing Processes, Vol. 12, No.5, 1997, pp.935-944.
Gong, H, Lim, MK, “Experimental investigation on tension and compression properties of an electro-rheological material.” Journal of Intelligent Material System and Structures, USA, Vol 7, No 1, 1996, pp 89-96 Gong, H, Lim, MK, Tan BC, “Influence of a locally applied electro-rheological fluid layer on vibration of a simple cantilever beam.” Journal of Intelligent Material Systems And Structures, Vol4, No3, 1993, pp379-384
Gong, H, Guceri SI, “Simulation accuracy of a contraction flow of viscoelastic polymer liquid in liquid molding processes.” Journal of Materials Processing Technology, Vol29, 1992, pp351-371
Gong, H, Lim, MK, “Electro-rheological fluid and its damping effect on a cantilever beam.” Journal of Institution of Engineers, Singapore, Vol 31, No6, 1992, pp61-70
Gong, H, Guceri, SI, “Non-linear computational instability damping and filtering in viscoelastic flow simulations.” Journal of Non-Newtonian Fluid Mechanics, Vol38, 1991, pp247-271