LIM Chu-Sing, Daniel
Associate Professor

Ph.D., B.Eng.(Hons), SpD (Microbiol), FIBA, SrMIES, MBES (S’pore)

Director, Biomedical & Pharmaceutical Engineering Cluster

Associate Professor, School of Mechanical & Aerospace Engineering

Associate Professor, School of Chemical & Biomedical Engineering (Joint Appointment)

 

c/o Biomedical Engineering Research Centre

     50 Nanyang Drive, Research Techno Plaza

     6th Floor, XFrontier’s Block,

     Nanyang Technological University, Singapore 637553

 

Tel: (65) 63162957 (BPEC), (65) 67905033 (MAE), (65) 63168966 (BioE)

Fax: (65) 67912274
Email: mchslim@ntu.edu.sg

 

 

 

·        Profile / Biography

Dr Lim Chu Sing, Daniel obtained a Bachelor’s degree with Honours and a PhD from Loughborough University

of Technology in 1992 and 1995 respectively. He holds a Specialist Diploma in Microbiology from the

Singapore Polytechnic. He received the National Science & Technology Board (A*STAR) Post-doctoral Fellowship in 1995. In 1999, he joined the Nanyang Technological University as Assistant Professor. He was later appointed Associate Professor from 2003 and received his tenure in 2005. Dr Lim is currently the Director of the Biomedical & Pharmaceutical Engineering Cluster, overseeing three research centers and two specialist laboratories. Dr Lim also holds an adjunct appointment with the A*STAR Singapore Institute of Clinical Sciences, Brenner Centre for Molecular Medicine. Dr Lim holds certificates in Biosafety Management, Good Manufacturing Practices in the Biomedical Industry, Responsible Care and Use of Laboratory Animals and Intellectual Property.

 

Dr Lim’s previous appointments include being Vice-Dean / Associate Chair (Administration) at the School of

Chemical and Biomedical Engineering from 2005 to 2007. During that same time, he was concurrently the Director of the Biomedical Engineering Research Centre (BMERC). During his 2-year stint, he was responsible for revamping the interschool center to more strategic directions, including adding on laboratories in Arthropod-inspired Therapy, Microbiological Targeted Biosensors, Biomolecular Physics, Cellular Chemistry, High Content Screening & Analysis, Pharmaco-genomics and Synthetic Chemical Processing, to the conventional fields of bioengineering. He was appointed Visiting Scientist in BioPhotonics at the Department of Biomedical Engineering, Duke University, and Visiting Scientist in Materials and Selective Laser Sintering at DTM Corporation (USA).

 

His research interests include Optical Biosensor Technologies, Bio-Rapid Prototyping and Tooling, Stent

Technologies, Monitoring Mutation in Progress and Combinatory Drug Efficacy Systems for Pharmaceutical Biomolecule Investigations. Dr Lim expertise in Medical Devices has also resulted in a novel respiratory implant for patients with an uncommon genetic disorder. Two of his work has been licensed to two biomedical companies for commercialization. He teaches undergraduate and postgraduate students in stage-gate for medical devices, surgical assist technologies, biomedical physics, and other aspects of biosafety and bioethics.

 

Dr Lim serves as a Council Member of the Institution of Engineers, Singapore and Chairs the Bioengineering

Technical Committee. He has authored over 110 journal and conference publications, 2 books and 4 book

chapters. Dr Lim has 4 patents pending. He is the recipient of several prestigious awards including the Singapore Foundation Award for Education. Dr Lim is also active in community service and overseas humanitarian medical aid efforts.

 

·        Research Interests 

Rapid Technologies for Microbiological Targeting, System for Monitoring Mutation in Progress, Combinatory Drug Efficacy Screening, Novel Stent Technologies, Bio-Rapid Prototyping/Tooling, Materials & Materials Processing. 

 

·        Prizes and Awards 

o        Singapore Foundation Award (Education), Japanese Chamber of Commerce and Industry (JCCI), 1999.

o        Young Scientist Award (Certificate of Finalist), National Academy of Science, 2000. 

o        The Enterprise Challenge Innovator Award, Prime Minister’s Office, 2002.

o        Lord Foundation Award (Non-invasive Spectroscopic Blood Glucose Monitoring), 2001.

o        Young Executive of the Year (1st Runner-up), Rotary Club of Singapore North, 1999.  

o        Tan Kah Kee Young Inventor Awards (Biomedical)(Bronze & Commendation), 2003.

o        Merit Award, National Techno-Venture Business Plan Competition, Start-up@Singapore Business Plan Competition, 2000.

o        CrayQuest Award (Grand Champion), Silicon Graphics / NSTB (A*STAR), 1999.

o        CrayQuest Award (Bronze), Silicon Graphics / NSTB (A*STAR), 1998.

o        Outstanding Paper Award, Int’l Congress on Biological and Medical Engineering, 2002.

o        Outstanding Paper Award, Int’l Conf. on Biomedical & Pharmaceutical Engineering, 2006.

o        Tan Chin Tuan Overseas Research Fellowship, 2000.

o        National Science & Technological Board Post-doctoral Fellowship, 1995.

 

            Supervised graduate student/ research staff awards:

 

o        Wang Junhong, National Science & Technology Board (A*STAR) Gold Medal, 2000.

o        P. V. Preejith, Far Eastern Economic Review Young Inventors Award, 2002.

o        Fu Sheng, A*STAR Singapore Millennium Fellowship, 2005.

o        Chiang Wei Meng, Tan Kah Kee Young Inventor Award, 2002.

o        Ang Ker Ser, Tan Kah Kee Young Inventor Award, 2002.

o        Aneira Pariwono, Young Investigator’s Award (Gold), Int’l Conf. on Biomed. & Pharma. Eng., 2006.

o        Andiyanto Sutandar, OWLS (Optics Within Life Science) Award, 2004.

o        Samuel Tan, SPIE (Society of Photonics) Best Poster Award (Merit), 2004.

o        NTU Business Plan Competition (Grand Champion)(2004).

o        Yap Yi-Lwern Kevin, American Assoc. of Pharmaceutical Scientists-NUS Symposium Best Presentation Award, 2005, 2006.

o        Yap Yi-Lwern Kevin, American Assoc. of Pharmaceutical Scientists-NUS Symposium Best Poster Award, 2005, 2006.

o        Foo Jong Yong Abdiel, Outstanding Paper Award, Int’l Confl on Biomed. & Pharma. Eng., 2006.

 

 

·        Public and Professional Service / Features

 

o        Portable Rapid Detection System for Tuberculosis (Collaboration with Singapore General Hospital). Publicity reports in various local and international media, 2004, 2005.

o        Rapid DNA Fingerprinting Technology (coined RDF Technology) (Collaboration with Criminal Investigation Department, Singapore Police Force). Publicity reports in various local and international media, 2005.

o        TV Feature ‘New Frontiers’. Featuring Biosensors Laboratory Group, 2004.

o        Rapid Sensor for Alzheimer’s Disease and Acute Stroke Monitoring (Strait’s Times exclusive,  Alzheimer’s Disease Association, etc), 2002.

o        Novel Respiratory Stents for Tracheobronchial Relief (Strait’s Times exclusive), 2001. 

o        ‘Engineer or Doctor?’, feature relating to the biomedical engineers(ing) (The Newpaper), 1999.

    • Personality Feature in NSTB’s (A*STAR) ‘No Limits’ Publication for Bioengineering Research, 1998.
    • Executive Committee Member (from 2004) & Member (from 1999), Biomedical Engineering Society.
    • Council Member & Senior Member, Institute of Engineers Singapore, 2005 – current.
    • Chairman, Bioengineering Technical Committee, Institute of Engineers Singapore, 2005 – current.
    • Fellow, International Biographical Association, 1999 – current.
    • Research Board of Advisors, American Biographical Institute, 2001 – current.
    • Member, Economic Development Board’s Biosciences Workgroup, 2005.
    • Editorial Board, International Journal for Biomedical & Pharmaceutical Engineering, 2006.
    • Reviewer, various international Science Citation Indexed journals, 2003 onwards.
    • Chairman, Strategic Review Task Force, Division of SEM, MAE, 2003 – 2005.
    • Honorary Assistant Superintendent of Police, NPCC, 2001 – current.
    • Education and Welfare Coordinator, Staff Recreation Club, 2002.
    • Honorary Auditor, Staff Recreation Club, 2002 – 2004.
    • Invited Lecture, “Optical Detection of Bioanalytes”, Institute of Veterinarian Sciences, Indonesia, 2004.
    • Co-Chairman, Working Committee, NTU-SGH Medical Bioengineering Initiative, 2004 – current.
    • Invited Speaker, Talks to Government Bodies, Statutory Boards, Ministry of Education Junior Colleges and Secondary Schools on “Biomedical Engineering”.
    • Secretary, Biomedical Engineering Task Force, NTU, 1997 – 1998.
    • Member, Technical Education Advisory Committee, Institute of Technical Education (Dover), 1998 – 2001.
    • Judge, National Science Challenge, Singapore Science Centre and A*STAR. 2005-2007.
    • Chairman, YPAG Policy Group (Transport Policy).
    • IES Engineering Awards, Panel of Judges. 2005, 2006, 2007.
    • Panel of Reviewers / Auditor for Various Degree and Diploma Courses on Biomedical Engineering.
    • Consulting services to various local and international organizations/companies.
    • South West Community Development Council (CDC) Community Safety & Security Programme Award, 2003, 2005.
    • Chinese Development Assistance Council (CDAC) Service Award, 2004.
    • Etc.

 

 

·        Publication List 

Over 120 publications. Selected publications include:

 

Journal Papers

 

1)       A. Sutandar, C. S. Lim and L. Y. Hsu (2007). “System for Real-time Monitoring of Mutation in Progress”, Journal of Applied Microbiology, (In Press).

 

2)       A. Pariwono, T. Lo, C. S. Lim, S. X. Wang and Y. W. Chan (2007). “Rapid Tuberculosis Screening for On-site Patient Screening”, International Journal of Biomedical & Pharmaceutical Engineering, (In Press).

 

3)       Y. L. K. Yap, S. Y. Chan and C. S. Lim (2007). “The Reliability of Traditional Authentication – A Case of Ginseng Misfit”, Food Chemistry, (In Press).                                                                                            

 

4)       J. Y. A. Foo and C. S. Lim (2007). “Induced Changes on the Lower and Upper Limbs Pulse Transit Time Ratio During Inspiratory Resistive Breathing”, Biomedizinische Technik, 52 (3): 248-254.

 

5)       Y. L. K. Yap. S. Y. Chan and C. S. Lim (2007). “Infrared-based protocol for the Identification and Categorization of Ginseng and its Products”, Food Research International, 40 (5): 643-652.               

 

6)       J. Y. A. Foo, C. S. Lim, S. J. Wilson, G. R. Williams, M. A. Harris and D. M. Cooper (2007). “Pulse Transit Ratio as a Potential Marker for Paediatric Crucal and Brachial Blood Pressure Index”, Journal of Human Hypertension, 21 (5): 415-417.

 

7)       Y. Sun, C. S. Lim, A. Q. Liu, T. C. Ayi and P. H. Yap (2007). “Design, Simulation and Experiment of Electroosmotic Microfluidic Chip for Cell Sorting”, Sensors & Actuators A. Physical, A133 (2): 340-348.  

 

8)       X. J. Liang, X. M. Zhang, C. S. Lim, A. Q. Liu, P. H. Yap and T. A. Ayi. (2007). “Determining Reflective Index of Single Living Cell Using an Integrated Microchip”, Sensors & Actuators A. Physical, A133 (2): 349-354.

                                                                                                           

9)       C. S. Lim, K. M. Toh and M. S. Yong (2007). “Biodegradable Metallic Stent”, Journal of Mechanics in Medicine and Biology (Invited Paper), 7 (1) (In Press).

                                                                                       

10)   P. Wang, C. S. Lim, S. Chauhan, J. Y. A. Foo and V. Anantharaman (2007). “Phonocardiographic Signal Analysis Using a Modified Hidden Markov Model”, Annals of Biomedical Engineering, 35 (3): 367-374.                                                                                                                                                                                    

11)   W. Z. Song, X. M. Zhang, C. S. Lim , A. Q. Liu, P. H. Yap and H. M. M.Hosseini (2007). “Refractive Index Measurement of Single Living Cells Using On-chip Fabry-Perot CA”, Applied Physics Letters, 89 (1): art. no. 203901.

 

12)   Y. L. K. Yap, S. Y. Chan and C. S. Lim (2007). “Authentication of Traditional Chinese Medicine Using Infrared Spectroscopy: Distinguishing Between Ginseng and its Morphological Fakes”, Journal of Biomedical Science, 14 (2): 265-273.                                                                                

13)   Y. L. Wu, C. S. Lim, S. Fu, A. I. Y. Tok, F. Y. C. Boey and X. T. Zeng (2007). “Surface Modifications of ZnO Quantum Dots for In vivo Bio-Imaging”, Nanotechnology, 18 (21): art. no. 215604.         

           

14)   C.W. Goh, Y.W. Gu, C.S. Lim and B.Y. Tay (2007). “Influence of Nanocrystalline Ni-Ti Reaction Agent on Self-propagating High-temperature Synthesized Porous NiTi”, Intermetallics, 15 (4): 461-467.

 

15)   P. V. Preejith, C. S. Lim and T. F. Chia. (2006). “Serum Albumin Measurement Using Tapered Optical Fiber Biosensor”, Measurement Science & Technology, 17 (12): 3255 – 3260.                   

 

16)   S. S. W Tan, H. K. K. Tan, C. S. Lim and W. M. Chiang (2006). “A Novel Stent for the Treatment of Persistent Buccopharyngeal Membrane”, International Journal of Pediatric Otorhinolaryngology, 70 (9):1645-1649.                                                                                                                  

17)   Y. W. Gu, H. Li, B. Y. Tay, C. S. Lim, M. S. Yong and K. A. Khor (2006). “In vitro Bioactivity and Osteoblast Response of Porous NiTI Synthesized by SHS Using Nanocrystalline NiTi Reaction Agent”, Journal of Biomedical Materials Research (Part A), 78 (2): 316-323.             

 

18)   J. Y. A. Foo, C. S. Lim and P. Wang (2006). “Evaluation of Blood Pressure Changes Using Vascular Transit Time”, Physiological Measurement, 27 (8): 685-694.                                   

 

19)   Y. W. Gu, B. Y. Tay, C. S. Lim and M. S. Yong (2006). “Nanocrystalline Apatite Formation and its Growth Kinetics on Chemically Treated Porous NiTi”, Nanotechnology, 17 (9): 2212-2218.

            

20)   J. Y. A. Foo and C. S. Lim (2006). “Dual-Channel Photoplethysmography to Monitor Local Changes in Vascular Stiffness”, Journal of Clinical Monitoring and Computing, 20 (3): 221-227.

 

21)   J. Y. A. Foo and C. S. Lim (2006). “Pulse Transit Time Based on Piezoelectric Technique at the Radial Artery, Journal of Clinical Monitoring and Computing, 20 (3): 85-192.

 

22)   Y. W. Gu, B. Y. Tay, C. S. Lim and M. S. Yong (2005). "Biomimetic Deposition of Apatite Coating on Surface-modified NiTi Alloy”, Biomaterials, 26 (34): 6916-6923.                                           

 

23)   Y. L. K. Yap, S. Y. Chan, Y. W. Chan and C. S. Lim (2005). “Overview on the Analytical Tools for Quality Control of Natural Product-based Supplements: A Case Study for Ginseng”, ASSAY and Drug Development Technologies, 3 (6): 683-699.                                                            

24)   Y. W. Gu, L. S. Goi, C. W. Goh, C. S. Lim, A. E. W. Jarfors (2005). “Solid State Synthesis of Nanocrystalline and/or Amorphous 50 Ni-50Ti Alloy”. Materials Science and Engineering A, Vol. 392, No. 1-2, pp. 222 - 228.                                                                                                               

25)   W. M. Chiang, C. S. Lim, C. K. Chua, P. L. Lo and C. T. Eng (2005). "Rapid Airway Stent Customization for Respiratory Management", Rapid Prototyping Journal, 11 (2): 106-112.         

 

26)   Y. W. Gu, B. Y. Tay, C. S. Lim and M. S. Yong (2005). “Characterization of Surface Oxidation Layer on NiTi Alloy for Improved Bioactivity”, Applied Surface Science, 252 (5): 2038-2049.     

                                                                                                                                                                             

27)   C. S. Lim, W. M. Chiang, K. S. Ang, C. K. Chua, W. S. Ng and G. B. Chai (2004). “Polymer-based Stents Produced by Rapid Prototyping and Tooling”, International Journal of Product Development (Invited Paper), 1 (2): 172-182.

 

28)   Y. W. Gu, K. Goi, A. E. W. Jarfors, D. L Butler and C. S. Lim (2004). “Structural Evolution in Ti-Si Alloy Synthesis by Mechanical Alloying”, Physica B: Condensed Matter, 352 (1): 299-304.

            

29)   C. S. Lim, C. K. Chua, K. F. Leong, M. L. Lau and K. W. Tan (2004). “Enhanced Learning of Rapid Prototyping Systems Through Multimedia”, International Journal of Mechanical Engineering Education, 32 (2): 115-125.

 

30)   A. Kishen, M. S. John, C. S. Lim and A. Asundi (2003).  “Development and Application of a Fiber Optic Bacterial Sensor to Monitor Caries Activity in Human Saliva”, Biosensors and Bioelectronics, 18 (11): 1371-1378.                                                                                                             

 

31)   PV Preejith, C. S. Lim, A. Kishen, M. S. John and A. Asundi (2003).  “Total Protein Measurement Using a Fiber-optic Evanescent Wave-based Biosensor”, Biotechnology Letters, 25 (2): 105-110.                                  

           

32)   E. K. W. Sim, S. Muskawad, C. S. Lim, K. H. Lim, R. T. Grignani, J. H. Yeo, A. Durrani,  G. Lau, C. Duran (2003).  “Comparison of Human and Porcine Aortic Valves”, Clinical Anatomy, 16 (3): 193-196.                                                                                                                                        

33)   J. Tong, C. S. Lim and P. Goh (2003).  “Technique to Study the Biomechanical Properties of the Human Calcaneal Heel Pad”, The Foot, 13 (2): 83-91.

 

34)   A. Kishen, V. M. Murukeshan, V. Krishnakumar, C. S. Lim and A. Asundi (2003).  “Digital Speckle Pattern Interferometry (DSPI) and Thermographic Investigations on the Thermal Response in Human Teeth”, Optics & Lasers in Engineering, 39 (4): 489- 500.             

 

35)   A. R. Pradeep Kumar, C. V. Subba Rao, A. Parameswaran, A. Kishen and C. S. Lim, (2002).  “Scanning Electron Microscopic and Energy Dispersive Spectrometric Investigations on the Effect of XeCl Excimer Laser on Human Dentin with Smear Layer”.  Journal of Oral Rehabilitation. 29 (10): 1003-1009.                                                                                                                                 

36)   C. S. Lim, C. T. Eng, S. C. Lin, C. K. Chua and Y. T. Lee (2002).  “Rapid Prototyping and Tooling for Custom-made Tracheobronchial Stents”. International Journal of Advanced Manufacturing, 20 (1): 44-49.                                                                                                                                      

37)   M. S. John, A. Kishen, Lim C. S. and A. Asundi (2002).  “Determination of Bacterial Activity Using an Evanescent Wave Fiber Optic Sensor”, Applied Optics, 41 (34): 7334-7338.   

 

38)   C. S. Lim, P. C. T. Eng, W. M Chiang and K. S. Ang (2002).  “Mechanical Test Protocols to Evaluate Polymeric Tracheobronchial Stents”, Journal of Mechanics in Medicine and Biology, 2 (3 – 4): 457-471.

 

39)   C. S. Lim, M. Chandrasekeran and Y. K. Tan (2001).  “Rapid Tooling of Powdered Metal Parts”.  International Journal of Powder Metallurgy, 37 (2): 63-66.                                   

 

40)   J. H. Wang, C. S. Lim and J. H. Yeo (2000).  “CFD Investigations of Steady Flow in Bi-Leaflet Heart Valve”, Critical Reviews in Biomedical Engineering, 28 (1-2): 61-68.                    

 

41)   F. Lateef, S. H. Lim, V. Anantharaman and C. S. Lim (2000).  “Changes in Chest Impedance”, American Journal of Emergency Medicine, 18 (4): 381-384.                                                 

 

42)   C. S. Lim, P. C. T. Eng, F. R. Ong and C. K. Chua (2000).  “Modelling of Windpipe Constriction in the Human Respiratory System”. (Invited Paper), SGH Proceedings (Refereed Journal). 9 (4): 237-243.

 

43)   C. S. Lim, C. K. Chua, K. Arichandran, G. T. H. Lim and V. Anantharaman (1997).  “Electrocardiographic Transmission in Ambulance-Hospital Telemedical Studies”, International Journal of Information Technology, 3 (2): 87-97.

 

44)   C. S. Lim and A. J. Clegg (1996).  “A Comparison of the Squeeze Casting and Investment Casting Processes for the Production of an Aluminium Alloy Metal-Matrix Composite”.  Foundry Trade Journal, 170 (3517): 152-155.

 

45)   C. S. Lim and A. J. Clegg (1996).  “A Hybrid Investment Casting Process for the Production of Metal-Matrix Composites”.  Foundryman, 89 (9): 279-285.

 

 

Text-books and book chapters

 

1)       C. K. Chua, K. F. Leong and C. S. Lim (2005).  “Rapid Prototyping – Principles and Applications (2nd Chinese Edition)”, World Scientific.

 

2)       V. V. Kulish, B. Wijayanto and C. S. Lim (2006). “Modelling of Two-phase Flow in the Human Respiratory System”, Book Chapter in ‘Human Respiration: Anatomy and Physiology, Mathematical Modeling, Numerical Simulation and Applications’, WIT Press.

 

3)       C. S. Lim, S. P Lim and Y. W. Chan (2004).  “Optical Biosensors – Principles and Applications in the Healthcare Industry”, Book Chapter in G267 ‘Life Sciences: Engineering Applications in Biology’, T. F. Chia eds., McGraw Hill Publishers.

 

4)       C. K. Chua, K. F. Leong and C. S. Lim (2003).  “Rapid Prototyping – Principles and Applications (2nd Edition)”, World Scientific.

 

5)       C. S. Lim, S. P Lim and Y. W. Chan (2003).  “Optical Biosensors – Principles and Applications in the Healthcare Industry”, Book Chapter in ‘Life Sciences: Engineering Applications in Biology’, T. F. Chia eds., McGraw Hill Publishers.

 

6)       C. S. Lim (2003). “Application of Light in Biomedical Sensing”, Carolina Publishers.

 

7)       C. K. Chua, C. S. Lim and Z. H. Du (2002).  “Computer Design and Manufacturing Systems, Techniques and Applications in Biomedical Systems”, Book Chapter (Chapter 6), Kluwer Academic Publishers, in “Handbook of Computational Methods in Biomaterials, Biotechnology and Biomedical Systems – Algorithm Development, Mathematical Analysis and Diagnosis”, Vol. 2, Cornelius T. Leondes (ed.), Kluwer Academic Publishers.

 

 

Conference Papers

 

1)       Y. L. K. Yap, C. S. Lim, S. Y. Chan and Y. W. Chan (2006). “Rapid Differentiation of Pharmaceutical Biomolecules: Ginseng and Adulterants”, International Conference on Biomedical & Pharmaceutical Engineering, 11th – 14th December 2006, Singapore.

 

2)       A. C. Van Der Zanden and C. S. Lim (2006). “First Steps Towards Bone Plate Morphing: A Finite Element Model of a Bone Plate with Micro Scratch”, International Conference on Biomedical & Pharmaceutical Engineering, 11th – 14th December 2006, Singapore.

 

3)       S. Fu, L. C. Kwek, T. C. Chia, C. S. Lim, C. L. Tang, W. S. Ang, M. C. Zhou and P. L. Loke (2006). “Detection of Colorectal Cancer Using Time-Resolved Autofluorescence Spectrometer”, Progress in Biomedical Optics and Imaging – Proceedings of SPIE 6191, art. no. 61910M.

 

4)       T. Y. Zhang, C. K. Kwoh and C. S. Lim (2006). "Studying Genetic Diversity by Mutations for Identification of Methicillin-resistant S. aureus", International Conference of Computational Systems Biology, 20 – 23 July, Shanghai, China.

 

5)       Y. L. K. Yap, S. Y. Chan, C. S. Lim, Y. W. Chan (2005). “Rapid Quality Surveillance of Ginseng”, International Congress on Complementary and Alternative Medicinces (ICCAM), 26th – 28th February, Singapore.

 

6)       W. M. Chiang, C. S. Lim, T. F. Chia, W. F. Tan and S. K. Lim (2005). “Optics-based Sensor for DNA Screening Applications, Proceedings of SPIE – The International Society for Optical Engineering, 5852 PART I, pp. 14 – 20.

 

7)       C. S. Lim, K. M. Toh and M. S. Yong (2005). “Investigations into a Metallic Biodegradable Stent”, 7th NTU-SGH Symposium, National Eye Centre, 11-12 August, Singapore.

 

8)       C. S. Lim (2005). “Materials in Biosensors”, ASM Seminar (Invited Lecture), Singapore Polytechnic, 5 July, Singapore.

 

9)       C. S. Lim, A. Sutandar and Y. W. Chan (2004). “Non-molecular Monitoring of Genetic Mutation in Bacteria”, Optics Within Life Sciences, 1 December 2004, Melbourne, Australia.

 

10)   S. K. Shailaja and C. S. Lim (2004). “Novel High Sensitivity System for Pain Measurement”, International Conference in Engineering Mechanics 2004, 29 Nov – 1 Dec 2004, Singapore.

 

11)   W. M. Chiang, C. S. Lim, T. F. Chia, W. F. Tan and S. K. Lim (2004). “Sensor to Detect and Analyze Short Tandem Repeat (STR) HUMVWA”, International Conference in Engineering Mechanics 2004, 29 Nov – 1 Dec 2004, Singapore.

 

12)   A. Sutandar, C. S. Lim and Y. W. Chan (2004). “Optical Sensing of Methicillin Resistant Staphylococcus aureus”, International Conference in Engineering Mechanics, 29 Nov – 1 Dec 2004, Singapore.

 

13)   C. S. Lim, A. M Pariwono and X. S. Wang (2004). “Rapid Biosensor for Detecting Tuberculosis”, BIOMED 2004, 2-4 Sept 2004, Kuala Lumpur, Malaysia.

 

14)   A. M. Pariwono, C. S. Lim, X. S. Wang, A. Asundi and Y. W. Chan (2004). “Rapid Sensor for Detecting Mycobacterium tuberculosis”, International Conference on Optics and Photonics in Technology Frontier, 12 – 15 July 2004, Chiba, Tokyo, Japan.

 

15)   C. S. Lim, P. V. Preejith, A. Asundi and T. F. Chia (2004). “Biomass Determination Using a Fiber Optic-based Technique”, International Conference on Optics and Photonics in Technology Frontier, 12 – 15 July 2004, Chiba, Tokyo, Japan.

 

16)   C. S. Lim (2004). “Rapid Prototyping for Biomedical Applications”.  Keynote Address, Rapid Prototyping, Tooling and Manufacturing (RPTM) 2004, Asian Institute of Medicine, Science and Technology, 1st National Seminar, 28 June 2004, Sungai Petani, Kedah, Malaysia.

 

17)   W. M. Chiang, C. S. Lim, C. K. Chua, P. L. Lo and C. T. Eng (2003). "Customisation of Airway Stents Using Rapid Prototyping and Tooling", International Conference on Advanced Research in Virtual and Rapid Prototyping, July 2003, Portugal.

 

18)   A. L. Teo, J. Lu, C. S. Lim, H. Q. Gong, S. M. Moochhala and C. Shearwood (2002).  “Microneedles Fabricated By Micro-Electro-Mechanical Systems (MEMS) Technology Significantly Increases Transdermal Drug Transport”, International Congress on Biological and Medical Engineering, Singapore 4-7 December 2002 (Best Paper Award).

 

19)   M. F. Gong, C. S. Lim, J. H. Yeo and N. C. Hwang (2001).  “Transient Contour Assessment for Bioprosthetic Heart Valve”, Proceedings of the Society of Heart Valve Disease (SHVD), June 2001, London, U.K.

 

20)   E. K. W. Sim, R. T. Grignani, C. S. Lim, J. H. Yeo and G. Lau (1999).  “Aortic Valve Cusp Anatomy”, The 7th Annual Meeting of the Asian Society for Cardiovascular Surgery, May 28 – 31, Singapore.

 

21)   C. S. Lim, V Anantharaman, K Arichandran, C. K. Chua and G. T. H. Lim (1998).  “Electromagnetic Interference Studies in Ambulance-Hospital Telemedicine Link”.  Inaugural NTU-SGH Biomedical Engineering Symposium, 23 April 1998, Singapore, 15.

 

22)   C. S. Lim, L. Siaminwe and A. J. Clegg (1996).  “Mechanical Property Enhancement in an Investment Cast Aluminium Alloy and Metal-Matrix Composite”.  9th World Conference on Investment Casting, Oct 1996, San Francisco, USA, 17:1 – 18.

 

23)   C. S. Lim, N. P. Hung, Y. C. Tan and N. L. Loh (1996).  “Creep Behaviour of Hot Isostatically Pressed Metal-Matrix Composites”.  Proceedings of the ASME Conference, v73, 17 – 22 Nov 1996, Atlanta, Georgia, USA, 443 – 454.

 

24)   C. S. Lim and A. J. Clegg (1995).  “The Production and Evaluation of Metal-Matrix Composite Castings Produced by a Pressure-Assisted Investment Casting Process”.  Proceedings of International Conference on Mechanics of Solids and Materials Engineering, Vol. A, Singapore, June, 142 - 147.