Configuring PocketPC 2003 Quick Start Guide 

Check out the following that you'll need to configure to use your PocketPC 2003 on campus.

   

  
Campus Wireless LAN Settings

To configure your PocketPC 2003 for use on NTUwireless:
  1. First check if your PocketPC has been tested to work on NTUwireless before from our list.

  2. Next you'll need to configure your PocketPC 2003 to use:

    a) SSID or Network Name NTUWL  (in uppercase)

    b) WEP or Data Encryption disabled

    c) Infrastructure or Access Point mode

  3. (The following configuration may differ on your PocketPC 2003. The example shown is screenshot from a HP iPAQ h4150 Pocket PC).

    First enable your WLAN on your PDA.




  4. Click on Start>Settings and then the Connections tab. Click on  Connections.
  5. Choose the Advanced tab and select Network Card.




  6. Click Add New...




    Enter NTUWL (in uppercase) and select The Internet as shown below:




    Next from the Network Key tab, select Open and Disabled as illustrated:




    Click OK when you're done.

  7. If your setup is successful you'll see the following NTUWL displayed as Connected.




  8. By default, most wireless network adapters are already set to Use server-assigned IP address  (show me). The TCP/IP configurations of your PocketPC should be in the form:

    IP Address 155.69.x.x
    Subnet Mask 255.255.x.x
    Default Gateway 155.69.x.x


         


Note: Above PocketDHCP utility is a useful tool which can help verify your PocketPC TCP/IP settings and also for troubleshooting. This utility can be downloaded here.  

(back to top)

VPN and Pocket Internet Explorer Settings

To use your PocketPC 2003 on the campus wireless network or on EDUWIN for Internet access, you'll need first to have the correct proxy settings and VPN (Virtual Private Network) pre-setup.

  1. Click on Start>Settings and then the Connections tab. Click on  Connections.

  2. Choose the Advanced tab and click Select Networks.




  3. Configure your connection settings as shown below. Next click on Edit... for My Work Network.




  4. Select the VPN tab and click on New...




  5. Create a VPN profile as shown below using vpngate.ntu.edu.sg. Click Next when done.




    Enter your Network Account and click on Finish.




  6. Next select the Proxy Settings tab. Check This network connects to the Internet.





  7. Click on OK to complete your configuration.

  8. To find out how to use VPN for Internet access on your PocketPC 2003, click here.   

    (back to top)

Windows Media Player Settings

Unlike PocketPC 2002, there is no network settings to be configured for Windows Media Player in PocketPC 2003. 

(back to top)

RealOne Player Settings

To configure your PocketPC RealOne Player:

  1. Launch your RealOne Player.




  2. Click on Options>Preferences and select Network... from the list




  3. Configure Network Setting as shown i.e 802.11B and 11Mbps. 




  4. Click on OK to complete your configuration.  

    (back to top)

Signing-In to Wireless LAN

Once you have VPN and proxy settings been properly configured, to access the Internet:

  1. Click on  and select Connect VPN.




  2. When prompted, please use your Network Account to sign in as shown. You may check on Save password if you're using own/personal PocketPC.




  3. If your sign-in is successful you'll see a timer as shown below displaying your VPN session time.




  4. To access the Internet, simply launch your Pocket Internet Explorer.




  5. To sign-out, click on  and select Disconnect.




    (back to top)

 

Printer-friendly | Send to a friend